$53.70 |Â
10% OFFÂ Phone Price : $59.70
CONFIRM THE PART FITS
Part Information
This oven burner igniter (part number WB13T10045) is for ranges.
Oven burner igniter WB13T10045 ignites the gas to light the oven burner.
Unplug the range or shut off the house circuit breaker for the range before installing this part. Wear work gloves to protect your hands.
Frequently Used Together
- $23.33 |Â20% OFFÂ Phone Price : $29.33
- $7.88 |Â11% OFFÂ Phone Price : $8.88
- $103.37 |Â10% OFFÂ Phone Price : $115.37
- $54.21 |Â10% OFFÂ Phone Price : $60.21
Top models using the same part
| Model Name | Model Number | Diagram Name |
|---|---|---|
| Model #JGSP42DET1WW GE gas range | JGSP42DET1WW | Gas & burner parts |
| Model #PGS968TEM1WW GE gas range | PGS968TEM1WW | Gas & burner parts |
| Model #PGS968TEP1WW GE gas range | PGS968TEP1WW | Gas & burner parts |
| Model #PGS968BEM1BB GE gas range | PGS968BEM1BB | Gas & burner parts |
| Model #JGS905KEK2CC GE gas range | JGS905KEK2CC | Gas & burner parts |
| Model #PGS908DEP3BB GE gas range | PGS908DEP3BB | Gas & burner parts |
| Model #JGS968KEK2CC GE gas range | JGS968KEK2CC | Gas & burner parts |
| Model #JGS905TEK3WW GE gas range | JGS905TEK3WW | Gas & burner parts |
| Model #JGS968SEK3SS GE gas range | JGS968SEK3SS | Gas & burner parts |
| Model #JGSP48BH6BB GE gas range | JGSP48BH6BB | Gas & burner parts |
Reviews
Simple to install
The hardest part was getting the right part. Once I got it, installation was quick and easy. It took a while because I used it as an excuse to deep clean the stove
John, San Francisco
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 1 - 2 hours
Yes, I would recommend this to a friend
Can be done by a novice. Do your research. Be Safe
My unit required me to remove the oven door and two lower cover plates to gain access to the old igniter. The lower plates remove easily but, the door had to come off first. There are videos online that can help you to remove the oven door correctly. Oven door is heavy.
douga, Pleasanton, CA
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Fairly easy to installs, but not with older stoves
It took longer for me to install, because the two screws by which the igniter is attached to the gas were both frozen. One broke while being unscrewed and the other required vice grips to remove it. I had to drill new holes in the support and use bolts to hold it in place. If the range were newer, the attaching screws might have come out ok, but with a GE stove installed in 2007, much more work was required.
EG H, California
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 1 - 2 hours
Yes, I would recommend this to a friend
Good quality part
I replaced the over and the boiler igniters. And the wife is happy to have her gas range back operating.
Gerry711, San Gabriel, California
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
Igniter Install
The connector melted on the original igniter. I had to pull the oven out and open the cover in the rear panel to hard wire the igniter using the wire nuts provided. No instructions provided.
RMArcuri, Newton NJ
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 1 - 2 hours