$22.23
CONFIRM THE PART FITS
Part Information
This ignition coil (part number 951-10646A) is for snowblower engines.
Ignition coil 951-10646A attaches on the side of the flywheel and produces the electrical charge to the spark plug.
Wear work gloves to protect your hands when installing this part.
Frequently Used Together
- $7.53 |Â12% OFFÂ Phone Price : $8.53
- $101.66 |Â11% OFFÂ Phone Price : $113.66
- $8.44 |Â11% OFFÂ Phone Price : $9.44
- $89.84 |Â6% OFFÂ Phone Price : $95.84
- $5.70 |Â15% OFFÂ Phone Price : $6.70
- $87.75 |Â6% OFFÂ Phone Price : $93.75
- $26.71 |Â18% OFFÂ Phone Price : $32.71
- $792.80 |Â$12.00 OFFÂ Phone Price : $804.80
- $3.07 |Â25% OFFÂ Phone Price : $4.07
Top models using the same part
| Model Name | Model Number | Diagram Name |
|---|---|---|
| Model #370-SUA MTD lawn & garden engine | 370-SUA | Engine |
| Model #365-SUA MTD lawn & garden engine | 365-SUA | Engine |
| Model #ZS365-SUB MTD lawn & garden engine | ZS365-SUB | Engine |
| Model #752Z365-SUB MTD lawn & garden engine | 752Z365-SUB | Engine |
| Model #365-SUB MTD lawn & garden engine | 365-SUB | Engine |
| Model #370-SUB MTD lawn & garden engine | 370-SUB | Engine |
| Model #31AM2N1C799 MTD gas snowblower | 31AM2N1C799 | Engine |
| Model #370-SUB-11 MTD lawn & garden engine | 370-SUB-11 | Starter assembly/blower housing |
| Model #265-SU-11 MTD lawn & garden engine | 265-SU-11 | Flywheel/blower housing |
| Model #270-QU MTD lawn & garden engine | 270-QU | Recoil starter |
Reviews
Prompt service
The correct part was delivered quickly. There was a lot of disassembly of the snow blower needed to install the new part which I thought was fairly complex.
Bill, Springfield Pa
Did you find this review helpful?
- Ease of Installation
- Very Difficult
- Duration of Installation
- 1 - 2 hours
Yes, I would recommend this to a friend
Easy to lnstall
Not difficult if your not a moron. My fingers got cold. That all
Joe t m, Desmoines
Did you find this review helpful?
- Ease of Installation
- Difficult
- Duration of Installation
- 30 minutes - 1 hour
Easy
Perfect fit, unlike the $15 one I purchased first online with same part number that wouldn't bolt on! Wouldn't make that mistake again! Thanks!
Zeke t m n, Onsted Mi
1 person thought this review was helpful.
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour
Not easy, but straightforward.
There was quite a bit more work involved than I thought. I had to remove the shroud, the muffler cover and exhaust pipe, the gas tank, and the pull start mechanism. The magnetos on the coil itself are adjustable, so I had to be very careful to align them just right. Winding the coil wires back through everything was tedious. However, it only took one try to get it apart, repaired and back together, and it started up the first try. In all, it was time consuming (about 3 hours) but straightforward. No special skills necessary. If you can turn a wrench and a screwdriver, you can do this.
mebryantlaw, Toledo, OH
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- More than 2 hours