- Kenmore refrigerator water filters
- Whirlpool refrigerator water filters
- Samsung refrigerator water filters
- GE refrigerator water filters
- LG refrigerator water filters
- Frigidaire refrigerator water filters
- KitchenAid refrigerator water filters
- Maytag refrigerator water filters
- Kenmore Elite refrigerator water filters
- Estate refrigerator water filters
- GE Profile refrigerator water filters
- Amana refrigerator water filters
- Bosch refrigerator water filters
- Dacor refrigerator water filters
- Electrolux refrigerator water filters
CONFIRM THE PART FITS
MTD Lawn & Garden Equipment Engine Deni 165SB & Huayi 165SB Carburetor (replaces 751-12705, 951-10974A) 951-12705
Part #951-12705
Online Only Price
$87.75 |
6% OFF Phone Price : $93.75
In Stock
For ZIP codes near Edit
Part Information
Basic Information
- Part Name: Lawn & Garden Equipment Engine Carburetor
- Manufacturer: Craftsman
- Category: Lawn & Garden Equipment
- Primary Function: This carburetor regulates the flow of air and fuel to the engine, ensuring optimal performance and efficiency.
Installation & Compatibility
- Compatible Models: Fits various Craftsman lawn and garden equipment models; please confirm this part is correct for your model before ordering.
- Installation Difficulty: Medium — Requires mechanical knowledge and attention to detail. Let the engine cool and drain the fuel tank before installation.
- Tools Required: Screwdriver, wrench set, and safety gloves for protection during installation.
Additional Information
Before ordering carburetor 951-12705, verify that it is the correct part number for the calibration code on your current carburetor. This part replaces Deni carburetors with calibration code 165SB and Huayi carburetors with calibration code 165SB. If your original carburetor does not match these suppliers or codes, use this chart to find the correct part number.
The supplier name (Huayi or Deni) and calibration code are typically stamped into the carburetor body, usually near the fuel inlet. The calibration code specifically is the center series of numbers starting from the 8th digit.
Important Note: This carburetor does not include the mounting gasket. Order the gasket or gasket kit for your specific model number separately.
Frequently Used Together
- $2.74 |27% OFF Phone Price : $3.74
- $35.59
- $7.53 |12% OFF Phone Price : $8.53
- $5.63 |15% OFF Phone Price : $6.63
- $4.40 |19% OFF Phone Price : $5.40
- $2.81 |26% OFF Phone Price : $3.81
- $364.03 |$12.00 OFF Phone Price : $376.03
- $7.13 |12% OFF Phone Price : $8.13
- $75.84 |7% OFF Phone Price : $81.84
- $36.99 |14% OFF Phone Price : $42.99
Top models using the same part
Model Name | Model Number | Diagram Name |
---|---|---|
Model #370-SUA MTD lawn & garden engine | 370-SUA | Engine |
Model #165-SU MTD lawn & garden engine | 165-SU | Engine |
Model #365-SUA MTD lawn & garden engine | 365-SUA | Engine |
Model #265-SU-11 MTD lawn & garden engine | 265-SU-11 | Carburetor |
Model #165-SUB-11 MTD lawn & garden engine | 165-SUB-11 | Carburetor |
Model #165-SUC MTD lawn & garden engine | 165-SUC | Carburetor |
Model #752Z365-SUB MTD lawn & garden engine | 752Z365-SUB | Engine |
Model #365-SUB MTD lawn & garden engine | 365-SUB | Engine |
Model #265-SU MTD lawn & garden engine | 265-SU | Engine |
Model #165-SUB MTD lawn & garden engine | 165-SUB | Engine |
Reviews
gets rid of the OE fluctuation
runs hotter than the OE carb. No longer does it surge, just runs clean and smooth.
throwsnow, vt
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Competitive price, delivery as promised
My carburetor went into a snowblower which had a lot of bodywork to remove before the installation. This was more difficult than the typical application
Peter 1, Plains Montana
Did you find this review helpful?
- Ease of Installation
- Difficult
- Duration of Installation
- 1 - 2 hours
Yes, I would recommend this to a friend
Snowblower
Installed today and ready for the snow. It took me about an hour and it was all going everything bolts right in thanks
Vitolo, Chicsgo
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 1 - 2 hours
Yes, I would recommend this to a friend
Easy to order, easy to pay. Came quickly
Ordered, arrived quickly. Place on snow blower and easy start.
Jack, York, ME
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Part was exactly the same as the old one fit good
Took alittle time fuel had to be drained and covers taken off to install
Mike, Ny
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Exactly as advertised
Was very easy to install and corrected my issue perfectly!
Oam1, St. Louis, mo
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
Yes, I would recommend this to a friend
Very complicated to install need technician
I watch a technician I hired to do this. I would not advise installing this yourself. You also need 3 gaskets to accomplish 2 on the more exterior portion of the carburetor and one on internal side






Tom S, Vienna va
Did you find this review helpful?
- Ease of Installation
- Very Difficult
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Easy install
It took about about a hour after taking things off
Abiss, Trenton nj
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend