CONFIRM THE PART FITS

Lawn Mower Blade Adapter with Pulley (replaces 194037, 194307, 413039, 532443950) 443950

Part #443950

This part is no longer available.

We've permanently sold out of this part. It's no longer available from the manufacturer and the manufacturer has no substitute for this part. Although our call center staff is always happy to help when possible, they don't have access to this part. If you can't find that part and decide to replace the product, we invite you to visit www.sears.com

Only ground shipment is available for this item.

Part Information

This blade adapter with pulley (part number 443950) is for lawn mowers.

Blade adapter with pulley 443950 attaches the mower blade and the ground drive belt to the engine shaft.

Disconnect the spark plug wire before installing this part. Wear work gloves to protect your hands.

Reviews

Sears replacement Lawn Mower Blade Adapter
August 15, 2020

Lawn Mower Blade Adapter with Pulley is perfect replacement. Works great.

Undisclosed, Gary,Indiana

Did you find this review helpful?

Ease of Installation
Very Easy
Duration of Installation
Less than 30 minutes

Yes, I would recommend this to a friend

belt pully
July 05, 2020

blade adapter with pulley worked like a charm for craftsman lawn mower

ttman0h, Undisclosed

Did you find this review helpful?

Ease of Installation
Very Easy
Duration of Installation
Less than 30 minutes

Yes, I would recommend this to a friend

28 inch Kenmore Briggs & Stratton mower
June 22, 2020

Perfect fit for my kenmore lawn mower. I did not need the belt guard.

Roton, Undisclosed

Did you find this review helpful?

Ease of Installation
Easy
Duration of Installation
Less than 30 minutes

Yes, I would recommend this to a friend

Blade adapter installation.
August 18, 2019

There was no problem with the old belt keeper, so I left it. One bolt and washer removes the blade, then the old adapter slides right off. Just make sure the belt is in the groove when you slide the new adapter on and re-install the blade.

Wecanfixit., Undisclosed

1 person thought this review was helpful.

Ease of Installation
Very Easy
Duration of Installation
Less than 30 minutes
better than the original but needed trimming
June 26, 2018

The original part was cheap embossed poorly designed, it's a Crapman, dissatisfaction was guaranteed ! the replacement part is a decent design though. The fit is guaranteed, it was ok on the shaft, but needed trimming of the original belt shield.

kija, PA

1 person thought this review was helpful.

Ease of Installation
Moderate
Duration of Installation
30 minutes - 1 hour
part fit fine
June 09, 2018

turns out the shaft was bent, so the mower needs extensive work, easier (and cheaper) to buy a new one

Pete033oh, Undisclosed

Did you find this review helpful?

Ease of Installation
Easy
Duration of Installation
Less than 30 minutes
Vague instructions
March 13, 2018

The instructions were vague. The included adapter would not work. I had to mix the old and new inorder to work.

Brodj, Fort Worth, Texas

1 person thought this review was helpful.

Ease of Installation
Moderate
Duration of Installation
30 minutes - 1 hour