CONFIRM THE PART FITS

Range Oven Control Board WB27T10566

Part #WB27T10566

This part is no longer available.

We've permanently sold out of this part. It's no longer available from the manufacturer and the manufacturer has no substitute for this part. Although our call center staff is always happy to help when possible, they don't have access to this part. If you can't find that part and decide to replace the product, we invite you to visit www.sears.com

Only ground shipment is available for this item.

This part fits

Part Information

This oven control board (part number WB27T10566) is for ranges.

Oven control board WB27T10566 monitors the temperature and controls the oven heat.

Unplug the range or shut off the house circuit breaker for the range before servicing the unit. Wear work gloves to protect your hands.

Reviews

Perfect Part Match
April 18, 2021

Perfect match even though our appliance was 15 years old. Not an easy installation but I'm sure I saved hundreds in a service call.

Dr P, Royal Oak, MI

Did you find this review helpful?

Ease of Installation
Moderate
Duration of Installation
1 - 2 hours

Yes, I would recommend this to a friend

Works great, easy to install...
April 16, 2021

Easy to install, saved having to replace a 13 year old oven

SteelerSean, Los Angeles

Did you find this review helpful?

Ease of Installation
Very Easy
Duration of Installation
Less than 30 minutes

Yes, I would recommend this to a friend

easy installation - everything was "plug and play"
December 27, 2020

TURN OFF POWER AT BREAKER! Took me about 30 min to open up the unit (remove the 'bezel' - 5 screws - 3 black 1/4 inch head on the top oven frame and two T10 Torx screws under the top microwave frame edge). Then simply pull off the bezel, Open microwave door and remove the two (2) cross head screws. The cover can be carefully lifted out and tilted to allow easy module replacement. Replace the old control board - remove the three cables from the oven frame (NOT from the module), unscrew the 4 module screws, remove and replace with new module - plug in the new cables in their respective slots (they are keyed so you can't plug them in wrong). Put it all back together in reverse-order, restore power and it should work like new again. the module works great!

LarryW, Maryland

Did you find this review helpful?

Ease of Installation
Easy
Duration of Installation
30 minutes - 1 hour

Yes, I would recommend this to a friend