CONFIRM THE PART FITS
Part Information
This gearbox (part number 67787) is for lawn tractor snowblower attachments.
Gearbox 67787 rotates the auger blades inside the auger housing.
Wear work gloves to protect your hands when installing this part.
Top models using the same part
| Model Name | Model Number | Diagram Name |
|---|---|---|
| Model #486248391 Craftsman snowblower attachment | 486248391 | Housing/gear/chain |
| Model #486248531 Craftsman snowblower attachment | 486248531 | Spiral/housing/gear |
| Model #486248392 Craftsman snowblower attachment | 486248392 | Spiral/housing/gear |
| Model #48624853 Craftsman snowblower attachment | 48624853 | Housing/chute/pulley v type 9" |
| Model #48624838 Craftsman snowblower attachment | 48624838 | Housing/spiral/gear |
Reviews
It was a somewhat easy install
When removing the shut impeller the roll pins were rusty and had a hard time removing them, the kit didn't have new ones,or new shear pins for the augers the old ones broke on removal, so it was a trip to the hardware store.
Reddog, Wisconsin
Did you find this review helpful?
- Ease of Installation
- Difficult
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Ridiculous to install
There is something seriously wrong with part #67787. The right side holes, do not match up to the left. The holes drilled for the right side, jam the auger into the housing. I had to center it the best I could and re-drill new holes(a good half inch off). The housing I have is not bent in any shape or form, the only reason I can find, is because your template is wrong. Now, the augers are crooked and have too many holes drilled. Other problem with this part# is, the forty something inch shaft, with key way, has the holes for the sheer pins, drilled off center(about an eighth inch difference). Next part# with issues is 711-0459. I ordered 4, one of them was about a sixteenth inch smaller(I.D.) and got the luxury of filing it out until it fit. Next issue - I was notified through email, I would receive my parts in 2 shipments, I ended up getting 3 shipments and never received a tracking # for the third. Needless to say, I'm throughly annoyed with this company and it's parts.
Not y, upper peninsula
Did you find this review helpful?
- Ease of Installation
- Very Difficult
- Duration of Installation
- More than 2 hours
Yes, I would recommend this to a friend
Good product
Product was as advertised. Instructions for install were straight forward. The shear pins that came with were not quite long enough to get the nut fully threaded. Otherwise happy with purchase.
Keith, Negaunee, mi
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Easy
Went into casing without a problem. Took a total of 10 minutes to install (including placing auger, blower, pully and setting key into keyway.) Surprised owner manual showed a less solid part when was exact same that came off.
Brian N, Rochester, NY
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
Yes, I would recommend this to a friend
Use the template and the installation is fairly ea
It took me about an hour. Not difficult at all. Good quality replacement part
Tim m, New Hampshire
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour
Easy to install and fast delivery
took about an hour which included salvaging the small shims and bushings from the old shaft
Dabird957, Undisclosed
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 1 - 2 hours
very easy to put toghter
easy to install an hook up. Did not take long to install
JCG!, Roy MT.
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
Auger Gearbox replacement
Was surprised that the Augur assembly provided was slightly different than the original but it seems to be a more heavy duty unit. Make sure you have good drills for the new hole creation and the replacement will go smoothly. Templates are spot on, and make sure the previous hole locations match up with the template prior to drilling the new holes. New bracket which holds the gearbox is more heavy duty as well. Make sure not to forget to drill second bolt hole there as well. I also replaced the main drive bearing which helped to make things go smoothly. Tighten the Bearing retainer plate last after all else is in place, and then attach the drive pulley.
WBSXKE, Gloucester, MA
1 person thought this review was helpful.
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour