$18.22 |Â
10% OFFÂ Phone Price : $20.22
CONFIRM THE PART FITS
Igniter MEQ61841001
Part #MEQ61841001
Replaced by #5318EL3001A
?
Manufacturer substitution
This part replaces MEQ61841001. Substitute parts can look different from the original.
Online Only Price
$83.13 |Â
7% OFFÂ Phone Price : $89.13
In Stock
For ZIP codes near Edit
This part fits
Part Information
This burner igniter (part number 5318EL3001A) is for dryers.
Burner igniter 5318EL3001A lights the gas burner to heat the dryer during the cycle.
Disconnect the power before installing this part. Wear work gloves to protect your hands.
Frequently Used Together
- $27.71 |Â18% OFFÂ Phone Price : $33.71
- $43.18 |Â12% OFFÂ Phone Price : $49.18
- $90.75 |Â6% OFFÂ Phone Price : $96.75
- $82.41 |Â7% OFFÂ Phone Price : $88.41
- $192.00 |Â9% OFFÂ Was : $210.99
- $21.49 |Â22% OFFÂ Phone Price : $27.49
- $40.92 |Â13% OFFÂ Phone Price : $46.92
- $25.42 |Â19% OFFÂ Phone Price : $31.42
- $11.91 |Â14% OFFÂ Phone Price : $13.91
Top models using the same part
| Model Name | Model Number | Diagram Name |
|---|---|---|
| Model #DLG0452W LG dryer | DLG0452W | Drum & motor |
| Model #DLG5932S LG dryer | DLG5932S | Drum & motor |
| Model #DLG5932W LG dryer | DLG5932W | Drum/motor assy |
| Model #DLG8388WM LG dryer | DLG8388WM | Drum/motor assy |
| Model #DLG0332W/00 LG dryer | DLG0332W/00 | All parts |
| Model #DLG5988B LG dryer | DLG5988B | Drum & motor |
| Model #DLG8388NM LG dryer | DLG8388NM | Drum/motor assy |
| Model #DLG5988SM LG dryer | DLG5988SM | Drum & motor |
| Model #DLG2532W LG dryer | DLG2532W | All parts |
| Model #DLG5988WM LG dryer | DLG5988WM | Drum & motor |
Reviews
Be sure you want do to this project!
I ended up returning the igniter. Replacing one on my Kenmore dryer appears impossible without removing the drum, etc. Not a quick project. But I appreciate SPD's return policies and procedures.
Mike, Boston
Did you find this review helpful?
- Ease of Installation
- Very Difficult
- Duration of Installation
- More than 2 hours
Kenmore Elite Ignitor install
Had to replace the igniter on a used dryer that I bought. I think the old one probably broke during transit. Installation was a little tricky only because the mounting screw was in a tight spot. I got it installed and she fired right up. My wife wasn't very happy. I think she was beginning to enjoy the time off from doing laundry.
George, Illinois
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Very Easy to Install ......
Took me about 30 minutes in total to replace the Burner Igniter. Three parts easy to remove. Top part, front control panel and window panel. Easy to put back together.
Mario, Baldwin Park, CA.
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Igniters are not easy to install
We had sears come out and diagnose the problem. That cost us $89.00. They said it was the igniter and it would cost $258.00 for them to install it so I ordered the part and my husband installed it. He used to work for a propane gas company so he knew what he was doing. The machine still didn't heat. So I went out and bought a new dryer rather than sink more money into a 10.5 year old dryer.
BBQ2018, Indiana
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour
I did it!
With the use of YouTube I was able to install this part myself. It took about one hr.
Newfie, SLC UT
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 1 - 2 hours
Easy to install
Dryer was not heating. Checked continuity and ordered part.
Mr. M k, Frozen north
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
dryer igniter install
time communing to install, caution is needed the part is fragile, going into a tight area to install. on a side note: instruction on the LP change out need include a caution when removing the veturi tubing not to contact the igniter.
MEP1, Santa Fe,NM
1 person thought this review was helpful.
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour
Part came quickly
The part came quickly and it was easy to install. It was more difficult remembering where all the screws went when putting it back together.
TedDBear, Undisclosed
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- 30 minutes - 1 hour