Dryer Drum Support Roller 4581EL2002E

So far so good.

So far so good, parts fit well. Time will tell regarding quality.

Ease of Installation

Very Easy

Duration of Installation

1 - 2 hours

Yes, I would recommend this to a friend

Part sent did not match part labeled or ordered

My experience was absolutely terrible because TWICE the part that I ordered was NOT the part that was pictured and was NOT the same part in the bag as what was labelled on the part bag. After TWICE returning and trying to get the correct part I gave up and purchased from another company.

Ease of Installation

Moderate

Duration of Installation

30 minutes - 1 hour

Yes, I would recommend this to a friend

Drum Roller Assembly

While manufacturer changed dimension of this replacement part shaft from the original, the part installed relatively easily and correctly. Most time was in disassembly of dryer having not done this before. Reassembly was quick. Dryer runs smoothly and quietly. Assembly includes roller and shaft and attachment nut with one washer. Should use additional washer from OEM part being replaced. Plastic triangle retaining clips holding shaft to roller have been eliminated in this assembly and are no longer needed. Note that this Kenmore dryer is actually an LG which could be important for parts and information searches such as disassembly hints. Price was very competitive compared to other sources. Part arrived 2 days later than estimated but currently can blame that on national/global shipping issues.

Ease of Installation

Moderate

Duration of Installation

1 - 2 hours

Yes, I would recommend this to a friend

DRYER DRUM SUPPORT ROLL

FAST SHIPPING, GOOD PARTS DIAGRAM TO GET THE CORRECT PART

Ease of Installation

Moderate

Duration of Installation

1 - 2 hours

Yes, I would recommend this to a friend

Not exactly as pictured but works!

Not exactly as pictured but still worked. Only 3 of the 6 rollers came with new nuts and washers but I was able to reuse the old ones. The shaft of the roller assembly that goes through the center of the roller seems like it may be narrower than the original so this may not work if you're looking to swap out just the wheel and not the entire assembly. This isn't a big deal for the front rollers since the nuts holding the rollers in place are already exposed. To replace the back rollers, you may need some additional disassembly of the dryer to access those nuts. I have a DLEX8100v. This model requires 6 rollers vs the 4 you will see in most videos. You will also need to figure out how to remove the steam tray, which also isn't in videos but wasn't too hard. I'm a mom with no prior experience with this repair and was able to complete it in about 2 hours. Some panels used multiple types of screw so I took a short video of each step to help remember where each screw went.

Ease of Installation

Moderate

Duration of Installation

1 - 2 hours

Yes, I would recommend this to a friend

Dryer making very loud noise

Part fit and worked perfectly just like the old one

Ease of Installation

Easy

Duration of Installation

30 minutes - 1 hour

Great part

It was a day late but the new redesigned part was perfect

Ease of Installation

Very Difficult

Duration of Installation

More than 2 hours

Yes, I would recommend this to a friend

Easy to installing

It don't look that easy to installed, once you opened the top of the dryers you can see where the bad drum roller located. once you have remove the drum and belt, you've the bad roller-coaster which was on the back lower section..

Ease of Installation

Moderate

Duration of Installation

30 minutes - 1 hour

Yes, I would recommend this to a friend