CONFIRM THE PART FITS
Leaf Blower Carburetor (replaces 530071632) 530071775
Part #530071775
Part Information
Helpful DIY instructions: Installation guide.
This carburetor (part number 530071775) is for leaf blowers.
Carburetor 530071775 mixes air and gas before the fuel mix goes to the engine.
Work in a well-ventilated area when installing this part. Drain the fuel tank and disconnect the spark plug wire before beginning the repair.
Top models using the same part
| Model Name | Model Number | Diagram Name |
|---|---|---|
| Model #358794300 Craftsman gas leaf blower | 358794300 | Carburetor #530071465 (c1q-w11) |
| Model #BVM200LE TYPE 1 Poulan gas leaf blower | BVM200LE TYPE 1 | Carburetor #530071465 (c1q-w11) |
| Model #BVM200 TYPE 2 (RECON) Poulan gas leaf blower | BVM200 TYPE 2 (RECON) | Carburetor's |
| Model #WT200LE TYPE 2 Weed Eater gas leaf blower | WT200LE TYPE 2 | Carburetor #530071465 (c1q-w11) |
| Model #BV1850 TYPE 2 Weed Eater gas leaf blower | BV1850 TYPE 2 | Carburetor(s) |
| Model #WT200 TYPE 1 Weed Eater gas leaf blower | WT200 TYPE 1 | Carburetor(s) |
| Model #BVM200 TYPE 2 Poulan gas leaf blower | BVM200 TYPE 2 | Carubretor - (c1q-w11) |
| Model #BV2000 TYPE 2 Weed Eater gas leaf blower | BV2000 TYPE 2 | Carburetor(s) |
| Model #BV1650-TYPE 2 Weed Eater gas leaf blower | BV1650-TYPE 2 | Carburetor's |
| Model #BV200 TYPE 1 (RECON) Weed Eater gas leaf blower | BV200 TYPE 1 (RECON) | Housing/crankcase/fuel tank |
Reviews
Not hard to install on my leaf blower
It was easy to put on leaf blower it runs good started on 3rd pull
XXtwoH, Kentucky
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Perfect fit
Easy to instal it took me only 5 minutes to replace the old one.
Cura, NJ
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
Did not work at all
Carburetor would not draw any fuel at all. May have been a manufacturing defect, don't have time to troubleshoot further. Ended up throwing it away. $50 wasted.
Paul G, MN
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
..and Sears still have the parts
Cradtsman leave blower from about >10 years ago. Won't start, carbureter gasgets not torn but lost their springiness and resiliance. I needed a new carbureter. I could not find it using their parts search engine but the parts guy found it and sent it. Used the good old USPS...took forever to get to me but ater installation, clearly solved my problem.
Bob E, Randolph, NJ
1 person thought this review was helpful.
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
OEM parts
I like the product, and it worked as it should. It took forever to get the items. Shipping took way too long!
JIMMY J, Stones throw from the Pres.
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 1 - 2 hours
Yes, I would recommend this to a friend
Carburetor
Right part and quick resolution to this project and not a lot of parts to remove from the blower to install the new carburetor in less than five minutes for me to get it straightened out and the blower is really running like new.
Metwo648590, Middletown Oh
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
Carb
It was easy to install. Took about 10 minutes.Haven't started it yet but hope all goes well.
Charles 5, Dennison Ohio
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
Carburetor was easy to install
Carburetor took approximately 10 minutes to install
CPhil, Boston, MA
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes