$32.97
|Â 15% OFF Phone Price : $38.97
CONFIRM THE PART FITS
Washer Tub Inner Rear 6306UU Bearing 4280FR4048L
Part #4280FR4048L
Replaced by #4280FR4048N
?
Manufacturer substitution
This part replaces 4280FR4048L. Substitute parts can look different from the original.
Online Only Price
$40.37
|Â 13% OFF Phone Price : $46.37
In Stock
For ZIP codes near Edit
This part fits
Part Information
Special details: Tub bearing 4280FR4048N is the inner bearing at the rear of the tub; order 4280FR4048Z if you need the outer rear bearing.
Tub bearing 4280FR4048N is an original equipment manufacturer (OEM part that fits Kenmore and Kenmore Elite models 79640272, 79640311, 79640318, 79640441, 79640448, 79640512, 79640518, 79641022, 79641028, 79641029, 79641072, 79641073, 79641172, 79641182, 79641272, 79641282, 79641372, 79641373, 79641379, 79641472, 79641473, 79641532, 79641538, 79641542, 79641548, 79641549, 79641572, 79641573, 79641683, 79641722, 79641728, 79641782, 79641783, 79641962, 79641963, 79641982, 79641983, 79642192, 79642198 and 79642199.
Also fits LG models CW2079C, WD3274R, WM0001H, WM0532H, WM0642H, WM0742H, WM1333H, WM1355H, WM1377H, WM1811C, WM1832C, WM2011H, WM2032H, WM2042C, WM2050C, WM2075C, WM2077C, WM2101H, WM2140C, WM2233H, WM2240C, WM2250C, WM2277H, WM2301H, WM2350H, WM2411H, WM2432H, WM2442H, WM2450H, WM2455H, WM2487H, WM2487W, WM2496H, WM2497H, WM2501H, WM2601H, WM2650H, WM2655H, WM2677H, WM2688H, WM2701H, WM2801H, WM2901H, WM3001H, WM3050C, WM3070H, WM3150H, WM3250H, WM3360H, WM3431H, WM3455H, WM3470H, WM3477H, WM3485H, WM3550H, WM3632H, WM3677H, WM3875H, WM3885H, WM3987H, WM3988H, WM3997H, WM4070H, WM4370H, WM5000H, WM8000H, WM8100H, WM8500H and WM9000H.
Bearing 4280FR4048N has an inner diameter of 30 millimeters, an outer diameter of 72 millimeters and is 19 millimeters wide.
Replaces part numbers 4280FR4048D, 4280FR4048L, 4280FR4048S and MAP62554001.
Frequently Used Together
- $31.50|Â16% OFF Phone Price : $37.50
- $21.62|Â22% OFF Phone Price : $27.62
- $15.60|Â11% OFF Phone Price : $17.60
- $108.05|Â10% OFF Phone Price : $120.05
- $73.06|Â8% OFF Phone Price : $79.06
- $27.71|Â18% OFF Phone Price : $33.71
- $237.87|Â5% OFF Phone Price : $249.87
- $6.77|Â13% OFF Phone Price : $7.77
- $58.07|Â9% OFF Phone Price : $64.07
Top models using the same part
| Model Name | Model Number | Diagram Name |
|---|---|---|
| Model #WM3885HCCA LG washer | WM3885HCCA | Drum and tub assembly parts |
| Model #WM8900HBA/00 LG washer | WM8900HBA/00 | All parts |
| Model #WM1377HW LG washer | WM1377HW | Dispenser assembly parts |
| Model #79641572210 Kenmore Elite washer | 79641572210 | Drum and tub parts |
| Model #79641782810 Kenmore Elite washer | 79641782810 | All parts |
| Model #79641782710 Kenmore Elite washer | 79641782710 | All parts |
| Model #79641783810 Kenmore Elite washer | 79641783810 | All parts |
| Model #79641783710 Kenmore Elite washer | 79641783710 | All parts |
| Model #WM3997HWA/00 LG laundry center | WM3997HWA/00 | Drum and tub parts |
| Model #CW2079CWD LG washer | CW2079CWD | All parts |
Reviews
Besring
Not only have I received the wrong bearing but I have also been given the wrong bearing to order when working with a rep from Sears. I am now waiting for the correct bearing to be shipped.
Brandon, Michigan
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour
Works fine
Works as advertised, not much else to say about it
Joe D, Texas
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Extremely difficult, but found the answer!
The old bearing after 10+ years of use was extremely difficult to get out. I soaked with oil break-free spray for two days, used a 5lb. sledge hammer with a piece of wood both under the drum and on top of the shaft to prevent damage. I beat on that thing off and on for two days and it did not budge. I tried virtually every recommendation I could find to no avail. I was determined to break it loose. I ended purchasing a screw the exact same length, diameter, and thread count as the screws that holds on the rotor and screws down into the shaft. I then put the drum directly on the cement floor with just a towel under it to prevent damage. I then screwed in the screws I purchased and beat on it without any wood in between it. I will add I also placed padding around the spindle in case my hammer glanced off the head of the screw, damaging the drum. Now I was making direct contact with the spindle. After about 7-8 good smacks it began moving, a few more and it was done. The sacrificial screw unscrewed easily and it was done. Put it all back together and it was like brand new. So many people have fought this situation. I only wish they knew about this method. A side note: my neighbor asked me if I had taken up the hobby of black smithing. That would be no.
Scott t b s, Salem, Oregon
Did you find this review helpful?
- Ease of Installation
- Very Difficult
- Duration of Installation
- More than 2 hours
Yes, I would recommend this to a friend
Slightly more involved than thought
It was easier with two people to handle all the big pieces
Paul, Mc Clure, PA
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 1 - 2 hours
Yes, I would recommend this to a friend
Very simple to install
It takes a lot of common sense and you tube videos to figure out what to do thanks
Mustang, Portland oregon
Did you find this review helpful?
- Ease of Installation
- Very Difficult
- Duration of Installation
- Less than 30 minutes
Yes, I would recommend this to a friend
Exact fit replacement parts
Parts fit and watched a YouTube video to do the job.
Bill, Catawissa Pa
Did you find this review helpful?
- Ease of Installation
- Difficult
- Duration of Installation
- More than 2 hours
Yes, I would recommend this to a friend
Easy to install, parts arrived in good condition.
Installation took 4 hours, fix was definitely worth the the time.
Leecomp, Pennsylvania
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour
Bearings
LG Front load Washer, Drum bearings and seal fail every 12 to 14 months and need replaced!
GRUMPY, Arizona
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- More than 2 hours
Yes, I would recommend this to a friend