$40.08 |
13% OFF Phone Price : $46.08
CONFIRM THE PART FITS
Part Information
This bevel locking lever pad (part number 089037008040) is for table saws.
Unplug the table saw before installing this part. Wear work gloves to protect your hands.
Frequently Used Together
- $19.26 |9% OFF Phone Price : $21.26
Top models using the same part
| Model Name | Model Number | Diagram Name |
|---|---|---|
| Model #315284620 Craftsman table saw | 315284620 | Table assy |
Reviews
P.O.S
This part is plastic and should have never been used in the manufacturing of this table saw. If this little piece breaks, your table saw is useless until its replaced or do what i did and put a ratchet strap all the way around your saw to hold the blade assembly in place so you can at least make 90¡ cuts. Very displeased that someone would think that plastic would be the right material to be used here.
Undisclosed, North Dakota
1 person thought this review was helpful.
- Ease of Installation
- Difficult
- Duration of Installation
- 30 minutes - 1 hour
Confused label
That it is called a pad and not a washer. Once I found a parts chart I was able to get correct name.
Big j 8, Undisclosed
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Easy to install
Steps: 1. Remove the 13mm nut from under the saw. 2. Unscrew the hex bolt from the handle. 3. Unscrew the handle bolt from the assembly underneath the saw. Be careful not to loose the internal parts. 4. Replace the table saw bevel lever locking pad. 5. Reverse steps to assemble.
Only Y, Wichita, Kansas
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
A bit tricky
Removing the pin that holds the locking lever is the hardest part.
Weekend W, Chestertown, Md
1 person thought this review was helpful.
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour