$15.83
CONFIRM THE PART FITS
Part Information
This battery (part number 193043GS) is for generators.
Battery 193043GS provides the power to start the generator engine for the electric start system.
Wear work gloves to protect your hands when installing this part.
Frequently Used Together
- $85.59 |7% OFF Phone Price : $91.59
- $32.11
- $9.31
- $85.96 |7% OFF Phone Price : $91.96
- $14.09
- $8.09
- $9.66
- $8.29
Top models using the same part
| Model Name | Model Number | Diagram Name |
|---|---|---|
| Model #580328300 Craftsman generator | 580328300 | Main unit |
| Model #1339-0 Generac generator | 1339-0 | Engine/control panel/wire |
| Model #1019-3 Generac generator | 1019-3 | Frame |
| Model #030210 Briggs & Stratton generator | 030210 | Main unit |
| Model #030240 Troybilt generator | 030240 | Main unit assembly |
| Model #030216 Snapper generator | 030216 | Main unit |
| Model #030242 Briggs & Stratton generator | 030242 | Main unit |
| Model #01893 Briggs & Stratton generator | 01893 | Main unit |
| Model #030471-0 Briggs & Stratton generator | 030471-0 | Main unit |
| Model #030470-0 Briggs & Stratton generator | 030470-0 | Main unit |
Reviews
Pretty easy to install.
It was relatively easy to install. I had all the right tools for it, so it took about 20 minutes to install.
Richard, Marienville, Pa
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Generator Engine Start Battery
(1) Ordering the part through Sears was easy quick. I should have signed into my account before ordering the part because a $10.00 off coupon appeared when I did sign in to verify the order I had placed 5 minutes earlier. (2) Study where the part is located and what needs to be removed to reach the part that needs replacement. In my case STEP ONE was to drain and remove the gasoline tank for access to the battery compartment mounting screws and nuts. STEP TWO get a helping set of hands because this battery is a little heavy; remove and old battery. Get your assistant to hold battery compartment while you align the 4 screw holes on the gas tank heat shield and the battery compartment holder. Install the 4 screws and nuts hand tight only. Release your assistant helper. Tighten 4 screws and nuts with wrenches. Connect the starter motor cables to the new battery posts; the battery posts are clearly marked for polarity. Start the battery post screws into the battery posts using only your fingers to avoid cross-threading the screws. Tighten the battery post screws to a maximum of 55 inch pounds per the battery manufacturer instructions enclosed with the new battery. Ensure the engine ignition switch is turned off and momentarily depress the engine starter button. You should immediately hear the starter motor engage the engine flywheel (click). You are finished.
robalt48, Redmond, WA
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 1 - 2 hours
Yes, I would recommend this to a friend
New battery for our generator.
Excellent product ! The sales person was very easy to talk to. They had all the answers to my Questions. .
Undisclosed, New York
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
Yes, I would recommend this to a friend
Battery install
Install a little tricky in that you need to remove the gas tank in order to get traction on bolts on battery holder from both ends.
Undisclosed, Louisiana
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Installation
Husband installed parts & the generator fired right up.
RaySR, Undisclosed
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour