$18.47 |Â
10% OFFÂ Phone Price : $20.47
CONFIRM THE PART FITS
Lawn & Garden Equipment Engine Starter Drive Assembly 696541
Part #696541
This part fits
Part Information
This starter drive assembly (part number 696541) is for lawn and garden equipment engines.
Starter drive assembly 696541 engages with and spins the flywheel to start the engine when the starter motor runs. The assembly may include multiple parts; refer to your parts diagram for a list of parts included.
Disconnect the spark plug wire and battery before starting the repair. Wear work gloves to protect your hands.
Frequently Used Together
- $8.20 |Â11% OFFÂ Phone Price : $9.20
- $9.02 |Â10% OFFÂ Phone Price : $10.02
- $6.89 |Â13% OFFÂ Phone Price : $7.89
- $25.45 |Â19% OFFÂ Phone Price : $31.45
- $302.95
- $53.25 |Â10% OFFÂ Phone Price : $59.25
- $14.84 |Â12% OFFÂ Phone Price : $16.84
- $141.49 |Â8% OFFÂ Phone Price : $153.49
- $165.53 |Â7% OFFÂ Phone Price : $177.53
Top models using the same part
| Model Name | Model Number | Diagram Name |
|---|---|---|
| Model #445777-0168-E1 Briggs & Stratton lawn & garden engine | 445777-0168-E1 | |
| Model #445777-0112-E1 Briggs & Stratton lawn & garden engine | 445777-0112-E1 | |
| Model #445677-0413-E1 Briggs & Stratton lawn & garden engine | 445677-0413-E1 | |
| Model #445777-0172-E1 Briggs & Stratton lawn & garden engine | 445777-0172-E1 | |
| Model #445777-0027-E2 Briggs & Stratton lawn & garden engine | 445777-0027-E2 | |
| Model #407777-0607-E2 Briggs & Stratton lawn & garden engine | 407777-0607-E2 | |
| Model #445777-0352-E1 Briggs & Stratton lawn & garden engine | 445777-0352-E1 | |
| Model #50028N707-0635-A1 Craftsman lawn & garden engine | 50028N707-0635-A1 | |
| Model #311707-0132-E1 Briggs & Stratton lawn & garden engine | 311707-0132-E1 | |
| Model #28N707-1135-E1 Briggs & Stratton lawn & garden engine | 28N707-1135-E1 |
Reviews
Just what was needed
Very good replacement for fixing the starter problem. Everything needed in kit to repair.
Clintjoe49, Ashland,Ky
Did you find this review helpful?
- Ease of Installation
- Difficult
- Duration of Installation
- 1 - 2 hours
Yes, I would recommend this to a friend
easy to install
it took me about 15 min. to remove the old part and about 30 min. to install the new part. it would have bin less if I had bought the installing tool
milt, Glen Burnie md.
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
tricky
It is hard to get c clamp on they don't make the special tool any more
Johnny K, Oak idge nj
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour
Easy to install
My engine had an earlier version but the new parts worked just fine. Replaced the nylon tube and Bendix gear to solve my starter problem. Quick amd smoothe starts for then on.
N4BYQ, North Carolina
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
easy installation
about 10 minutes to install on motor and about 30 minutes to reassemble outward assembly
siglo, tampa fl
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
Easy to install
Easy to install and perfit fit. only problem was delivery time.
Jim44, ELLIJAY GA
Did you find this review helpful?
- Ease of Installation
- Difficult
- Duration of Installation
- 30 minutes - 1 hour
Very hard to get the retaining clip back on.
Had to make a special tool to get the retaining 'C' clip on the end of the shaft. A real pain.
Jim 1, Near Seattle
Did you find this review helpful?
- Ease of Installation
- Difficult
- Duration of Installation
- 1 - 2 hours
Saved a lo lot of money
Was not easy to install unless you had the correct tool. Worked it out and came up with a solution. No need for a one time use tool.
Baseballdad, Basking Ridge NJ
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour