- Kenmore refrigerator water filters
- Whirlpool refrigerator water filters
- Samsung refrigerator water filters
- GE refrigerator water filters
- LG refrigerator water filters
- Frigidaire refrigerator water filters
- KitchenAid refrigerator water filters
- Maytag refrigerator water filters
- Kenmore Elite refrigerator water filters
- Estate refrigerator water filters
- GE Profile refrigerator water filters
- Amana refrigerator water filters
- Bosch refrigerator water filters
- Dacor refrigerator water filters
- Electrolux refrigerator water filters
CONFIRM THE PART FITS
Lawn & Garden Equipment Engine Ignition Module (replaces 545081826) 501092801
Part #501092801
Online Only Price
$33.63 |
15% OFF Phone Price : $39.63
In Stock
For ZIP codes near Edit
This part fits
Previous part numbers
Part #545081826
Part #530039234
Part #530039221
Part #545158001
Part #530039214
Part Information
This ignition module (part number 501092801) is for lawn and garden equipment engines.
Ignition module 501092801 controls ignition timing and sends voltage to the spark plug.
Wear work gloves to protect your hands when installing this part.
Top models using the same part
| Model Name | Model Number | Diagram Name |
|---|---|---|
| Model #BVM210FA Poulan gas leaf blower | BVM210FA | Cylinder/muffler/crankcase |
| Model #FB25 TYPE 3 Weed Eater gas leaf blower | FB25 TYPE 3 | Muffler/cylinder/crankcase |
| Model #FB25 TYPE 4 Weed Eater gas leaf blower | FB25 TYPE 4 | Muffler/cylinder/crankcase |
| Model #FB25 TYPE 1 Weed Eater gas leaf blower | FB25 TYPE 1 | Muffler/cylinder/crankcase |
| Model #FB25 TYPE 2 Weed Eater gas leaf blower | FB25 TYPE 2 | Muffler/cylinder/crankcase |
| Model #FB25 Weed Eater gas leaf blower | FB25 | Crankshaft/muffler/cylinder |
| Model #TE 475 TYPE 2 Weed Eater gas line trimmer | TE 475 TYPE 2 | Cylinder/crankcase/fuel tank |
| Model #P3500 TYPE 2 Poulan gas line trimmer | P3500 TYPE 2 | Cylinder/fuel tank/crankcase |
| Model #XT700 TYPE 1 Weed Eater gas line trimmer | XT700 TYPE 1 | Cylinder/crankcase/fuel tank |
| Model #VS2000BV TYPE 3 Weed Eater gas leaf blower | VS2000BV TYPE 3 | Cylinder/muffler/crankcase |
Reviews
Perfect!
This was the exact part, perfect fit, very good price and prompt delivery. Could'nt ask for more!
Wilbur, Wakenda Mo.
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- 30 minutes - 1 hour
Perfect fit for my blower
Model #358794750 Craftsman blower. This part fit perfectly and works great. Getting the blower apart wasn't overly difficult and I was glad this ignition module was easy to install and adjust the gap. Perfect fit, works great.
George, Topeka Kansas
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Exact Replacement for my Craftsman Blower
This module was the exact replacement on my Craftsman Blower and fixed my lack of spark problem. You will need to remove a LOT of components to get to the module so be aware this is not a simple replacement item. It also requires Hex and Torx tools most people don't normally have on hand. But it fixed my starting problem perfectly!
Kugamon, Richland, WA
Did you find this review helpful?
- Ease of Installation
- Difficult
- Duration of Installation
- 1 - 2 hours
Yes, I would recommend this to a friend
Very pleased with results
Even though it was time consuming to get to the coil because you had to totally tear the leaf blower apart, I am very pleased with the results. It has never started easier or idled better. Shipping was very timely
johnboy1976, Columbia, TN
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 1 - 2 hours
Yes, I would recommend this to a friend
Problem Solved
Installing the new ignition module was not complicated but it did take a while. A very large number of screws had to be removed in order to remove the old module and install the new one. It was worth it. It started right up and runs like new.
Hank, Fairmont, WV
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Replaced ignition coil on old Craftsman weed wacke
The ignition coil was easy to replace but getting to it was the hard part. Once the coil was installed, I used a variable speed drill to turn the crankshaft to test for a spark before reassembly. Once reassembled the unit started fine after the third pull.
boba, Hanover, PA
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend