CONFIRM THE PART FITS

Refrigerator Condenser Fan Motor Assembly 4681JB1029D

Part #4681JB1029D

Online Only Price
$76.83 | 
7% OFF Phone Price : $82.83
In Stock
For ZIP codes near Edit
60-day return policy
This part fits

Part Information

This condenser fan motor assembly (part number 4681JB1029D) is for refrigerators.

Condenser fan motor assembly 4681JB1029D includes the fan blade that moves air across the condenser and the motor that turns the fan blade. The assembly may include additional parts; refer to your parts diagram for a complete list of parts included.

Unplug the refrigerator and safely store any food that could deteriorate while the power is off before installing this part. Wear work gloves to protect your hands.

Reviews

Too expensive
June 14, 2022

You charged me double what the part was available for on amazon.

Gary B, Tulsa, OK

Did you find this review helpful?

Ease of Installation
Easy
Duration of Installation
30 minutes - 1 hour
This motor lead center pin was wrong configuration
November 15, 2021

Took 1/1/2 hours longer because of having to change the lead plug: cut and matched the wires according to colors; solder the splice wires; heat shrink covered the connections. The model no. and web sight said this was the right part. All else was correct. The compartment cover does not provide much room to reach over the top and insert plug-ins. On the next three questions I will answer as if everything was o.k. yet was lacking. Also could have saved $13 from another supplier after the fact.

dlg1598, Georgia

Did you find this review helpful?

Ease of Installation
Very Easy
Duration of Installation
30 minutes - 1 hour

Yes, I would recommend this to a friend

It works!!
March 01, 2021

We were surprised at how relatively easy the fix was and it definitely saved us money doing it on our own. The only thing that was different from the original motor and the replacement was the length of wire to connect. It was just barely long enough, but so far so good.

SGC - 2, Warrenville, IL

Did you find this review helpful?

Ease of Installation
Easy
Duration of Installation
30 minutes - 1 hour

Yes, I would recommend this to a friend

Installation
September 24, 2019

Easy to install and I had to say more cuz Sears wanted me to say at least 50 letters so I had to add a bunch more letters. I think this should do it.

I d w t s a, Undisclosed

Did you find this review helpful?

Ease of Installation
Very Easy
Duration of Installation
Less than 30 minutes
Didn't need it
August 04, 2019

The fan started working again. Didn't need the pay anymore.

Supercooldave, Homer Glen, Il

Did you find this review helpful?

Ease of Installation
Moderate
Duration of Installation
30 minutes - 1 hour
Condenser Fan Motor Assembly
June 11, 2019

Fairly easy to install but didn't fix the problem. Found out that the compresser was probably bad.

jean18, Undisclosed

Did you find this review helpful?

Ease of Installation
Moderate
Duration of Installation
30 minutes - 1 hour
easy to install
July 20, 2018

It was easy to install, Remove the wall plug, the water line, the lower rear panel and it's right there next to the water inlet valve. Remove the motor plug, the fan blade with a screwdriver and pliers by just pushing it off the motor shaft.The next steps get a little harder. There are two screws that hold the motor to the bracket. You need a short stubby phillips screwdriver to get to them from the coil side. After that, remove the motor from the bracket. Remove the rubber cushions from the front and back of the old motor and install them on the new one. Thread the new plug through the bracket and reverse the steps to put back together. Most of my time (about 50 mins) was spent removing and reinstalling those two screws. If you go online and search: LG Refrigerator Condenser Fan Motor Replacement #4681JB1029D It's a great video that will walk you right through it.

Pat R, Clark, NJ

1 person thought this review was helpful.

Ease of Installation
Moderate
Duration of Installation
30 minutes - 1 hour
once you figure it out it was easy
February 26, 2018

There were no instructions or videos on how to install. So it took a lot of time to figure it out. I did not want to pry or bend something and break it, then have to order more parts. Parts took forever to get here.

Tessd, houston tx

Did you find this review helpful?

Ease of Installation
Moderate
Duration of Installation
1 - 2 hours