CONFIRM THE PART FITS
Part Information
This angle lock spring (part number 43348) is for lawn tractor snow blade attachments.
Wear work gloves to protect your hands when installing this part.
Top models using the same part
| Model Name | Model Number | Diagram Name |
|---|---|---|
| Model #19940 MTD gas snowblower | 19940 | |
| Model #190-840-000 MTD accessory | 190-840-000 | |
| Model #190-940-000 MTD gas snowblower | 190-940-000 | |
| Model #33009A MTD gas snowblower | 33009A | |
| Model #48626456 Craftsman snow blade | 48626456 | 42" blade assembly |
| Model #48626453 Craftsman snow blade | 48626453 | 42" blade assembly |
| Model #48625406 Craftsman snow blade | 48625406 | Replacement parts |
| Model #486244073 Craftsman snow blade | 486244073 | 42" snow blade |
| Model #486244031 Craftsman snow blade | 486244031 | 42" snow blade |
| Model #486244062 Craftsman snow blade | 486244062 | 42" snow blade |
Reviews
exact fit
difficult to locate in parts list,but once located easy to inspect by photo and order. Fast delivery even with hassles of covid delaying it.
agi f s p s, Cleveland,Ohio
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
Yes, I would recommend this to a friend
42 inch Snow plow angle lock spring for LT1000
somewhat difficult to install. Spring looks as bad as my broken spring but it is not broken. Installed u-hook end first, then small hook end. put screwdriver in spring coil and then needle nosed pliers to push spring into hole.
phil, kirtland ohio
Did you find this review helpful?
- Ease of Installation
- Difficult
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Craftsman plow spring
It's strong. Be prepared to install with a pliers.
MattMN, Undisclosed
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- Less than 30 minutes
Exact match for the original
This spring locks the snow plow blade angle (45 degrees left, flat straight, and 45 degrees right). It needs to be replaced every couple of years depending on how much you use it. It is easy to replace; hooking it to the arm that supports the blade first and then taking a vice grip plyers to grab ahold of the hooked end to help stretch the spring and flex the hook slightly to insert the end if the hook through the hole in the locking arm.
blackcloud1, Detroit, Michigan
1 person thought this review was helpful.
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
Lawn Tractor Snow Blade Spring
Pretty clear cut installation. It is a tight spring, so you have to be careful.
GaryPr, Grand Rapids, Mi
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour
Somewhat easy to install.
Trying to stretch spring with needle nose pliers didn't work. I drove a small screwdriver between the coils and pried against the frame of the plow. Only needed to stretch it 3/8" and job done.
bill0491, Xenia, Oh
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- Less than 30 minutes