CONFIRM THE PART FITS

Refrigerator Auger Motor Drive Shaft WP999536

BEST SELLER

Part #WP999536

Replaced by #WP2188917
?
Manufacturer substitution
This part replaces WP999536. Substitute parts can look different from the original.
Online Only Price
$48.73 | 
11% OFF Phone Price : $54.73
In Stock
For ZIP codes near Edit
60-day return policy

Part Information

This auger motor drive shaft (part number WP2188917) is for refrigerators.

Auger motor drive shaft WP2188917 rotates to turn the auger that moves the ice through the ice container.

Wear work gloves to protect your hands when installing this part.

Top models using the same part

Model NameModel NumberDiagram Name
Model #10644323400 Kenmore side-by-side refrigerator10644323400
Motor and ice container parts
Model #KSCS25FSBT03 KitchenAid side-by-side refrigeratorKSCS25FSBT03
Motor and ice container parts
Model #KSBS25INBL03 KitchenAid side-by-side refrigeratorKSBS25INBL03
Motor and ice container parts
Model #KSBS23INWH00 KitchenAid side-by-side refrigeratorKSBS23INWH00
Motor and ice container parts
Model #KSCS25FSMS02 KitchenAid side-by-side refrigeratorKSCS25FSMS02
Motor and ice container parts
Model #KSCS25FSMS03 KitchenAid side-by-side refrigeratorKSCS25FSMS03
Motor and ice container parts
Model #KSCS25INBT01 KitchenAid side-by-side refrigeratorKSCS25INBT01
Motor and ice container parts
Model #10641523500 Kenmore Elite side-by-side refrigerator10641523500
Motor & ice container
Model #KSCS23INSS03 KitchenAid side-by-side refrigeratorKSCS23INSS03
Motor and ice container parts
Model #KSBP25INSS01 KitchenAid side-by-side refrigeratorKSBP25INSS01
Motor and ice container parts

Reviews

Exactly what I needed.
September 22, 2021

Easy to install. The shaft went from the motor to the ice dispenser. The splines on the old shaft were wore out. The new shaft fixed the problem.

Fix i a H, Raleigh, NC

Did you find this review helpful?

Ease of Installation
Easy
Duration of Installation
30 minutes - 1 hour

Yes, I would recommend this to a friend

EASY TO INSTALL
May 22, 2021

THE PART WAS AS DESCRIBED AND EASY TO INSTALL, WORKS AS IT IS SUPPOSED TO.

BOB 6, HARRISON,AR

Did you find this review helpful?

Ease of Installation
Very Easy
Duration of Installation
Less than 30 minutes

Yes, I would recommend this to a friend

Easy install
April 29, 2021

Took less than 10 minutes to install. Icemaker working great now.

Mark, CA

Did you find this review helpful?

Ease of Installation
Very Easy
Duration of Installation
Less than 30 minutes

Yes, I would recommend this to a friend

Sears lists wrong replacement part for original.
April 07, 2021

Sears lists this part (WP2188917) as a replacement part for original part #2198624. However the newer replacement drive shaft is 1/8" smaller in diameter and will not fit correctly into the ice crusher coupling above it or the auger motor below it. Also, new part does not have hollow chamber in top for spacer and spring to fit into. Photo shows this hollow chamber on original part. Contacted Sears customer service and they simply sent me the same incompatible replacement part a second time. As of now, still unable to fix this problem because can't locate the correct size auger motor drive shaft.

Original shaft has hollow chamber at top to hold indicated spacer and spring. Replacement shaft does not have this chamber.

JayG, Houston, TX

Did you find this review helpful?

Ease of Installation
Moderate
Duration of Installation
30 minutes - 1 hour

Yes, I would recommend this to a friend

Super Easy to install
March 02, 2021

It took less than 5 minutes to remove the old shaft and replace it with the new. 2 screws in and out.

Joe78, NJ

Did you find this review helpful?

Ease of Installation
Very Easy
Duration of Installation
Less than 30 minutes

Yes, I would recommend this to a friend

Longer than the last one
February 23, 2021

I am a lucky fella. It's not everyday a guy gets a new SHAFT. My old SHAFT just wasn't performing anymore. It was soft, bent, and too short... Well the good folks down at Sears Parts Direct have really outdone themselves this time. My replacement SHAFT came even before I was ready! Wow what a surprise! This new SHAFT is a little longer than my old one but don't you worry, I still got it in there. I always do ;). Anyway, I gotta get back to my surgery. Bye.

Richard J, Truck stop, MI

Did you find this review helpful?

Ease of Installation
Very Easy
Duration of Installation
Less than 30 minutes

Yes, I would recommend this to a friend

Longer Shaft
December 23, 2020

This shaft was slightly longer so it was able to index perfectly with the female ice box slot. I used to have to use my hand to get the ice, but with the longer shaft, I just get it through the door.. Now my ice maker is crushing it again.

T H, SLC, UT

Did you find this review helpful?

Ease of Installation
Very Easy
Duration of Installation
Less than 30 minutes

Yes, I would recommend this to a friend

Broken ice crusher.
July 27, 2020

Perfect fit. Took out 2 screws, pulled the old shaft out and dropped the the new one in. Very easy and fast.

Undisclosed, Boardman, Ohio

Did you find this review helpful?

Ease of Installation
Very Easy
Duration of Installation
Less than 30 minutes

Yes, I would recommend this to a friend