$52.11 |Â
10% OFFÂ Phone Price : $58.11
CONFIRM THE PART FITS
Dishwasher Circulation Pump (replaces W10510667) WPW10510667
Part #WPW10510667
Replaced by #W11032770
?
Manufacturer substitution
This part replaces WPW10510667. Substitute parts can look different from the original.
Online Only Price
$142.20 |Â
8% OFFÂ Phone Price : $154.20
In Stock
For ZIP codes near Edit
This part fits
Part Information
Basic Information
- Part Name: Dishwasher Pump and Motor Assembly
- Manufacturer: Whirlpool
- Category: Dishwasher
- Primary Function: Pumps water through the spray arms during the dishwashing cycle.
Technical Specifications
- Power Rating: Single-phase synchronized wash motor, rated at 120 volts, 60 Hz with power use of 37 watts; 45-watt maximum power rating.
Installation & Compatibility
- Compatible Models: Fits various Kenmore, Kenmore Elite, IKEA, Jenn-Air, KitchenAid, and Whirlpool dishwashers; please confirm this part is correct for your model before ordering.
- Installation Difficulty: Medium — basic technical skills recommended.
- Tools Required: Standard tools for appliance repair (e.g., screwdriver, pliers).
Additional Information
The Dishwasher Pump and Motor Assembly is a crucial component for ensuring efficient water circulation within your dishwasher. It is designed to replace original assembly parts including W10529163, WPW10529163, and W10864037, thus offering seamless compatibility with a broad range of dishwasher models. When replacing this part, it is essential to ensure that the electrical connection is properly secured to maintain optimal performance.
For safety and efficiency, it is recommended to refer to your dishwasher?s manual for detailed installation instructions and necessary safety precautions.
Frequently Used Together
- $21.96 |Â21% OFFÂ Phone Price : $27.96
- $57.69 |Â9% OFFÂ Phone Price : $63.69
- $8.02 |Â11% OFFÂ Phone Price : $9.02
- $79.35 |Â7% OFFÂ Phone Price : $85.35
- $22.13 |Â21% OFFÂ Phone Price : $28.13
- $48.43 |Â11% OFFÂ Phone Price : $54.43
- $4.37 |Â19% OFFÂ Phone Price : $5.37
- $17.63 |Â10% OFFÂ Was : $19.59
- $6.84 |Â13% OFFÂ Phone Price : $7.84
Top models using the same part
| Model Name | Model Number | Diagram Name |
|---|---|---|
| Model #66515049K111 Kenmore dishwasher | 66515049K111 | Pump, washarm and motor parts |
| Model #66213283K112 Kenmore dishwasher | 66213283K112 | Pump and motor parts |
| Model #66513282K116 Kenmore dishwasher | 66513282K116 | Pump, washarm and motor parts |
| Model #66513043K116 Kenmore dishwasher | 66513043K116 | Pump and motor parts |
| Model #66513283K114 Kenmore dishwasher | 66513283K114 | Pump and motor parts |
| Model #66513289K117 Kenmore dishwasher | 66513289K117 | Pump, washarm and motor parts |
| Model #66513049K111 Kenmore dishwasher | 66513049K111 | Pump, washarm and motor parts |
| Model #66213043K112 Kenmore dishwasher | 66213043K112 | Pump, washarm and motor parts |
| Model #66513283K116 Kenmore dishwasher | 66513283K116 | Pump, washarm and motor parts |
| Model #66513283K111 Kenmore dishwasher | 66513283K111 | Pump and motor parts |
Reviews
Dishwasher "Wash Pump Motor"
The motor was an exact match and is functioning like it is supposed to. I would recommend Sears Parts Direct to anyone looking for OEM replacement parts.
Mark C, Louisiana
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Part as described, required special tool though
It's the right part, shipped quickly, was relatively easy to install. Two comments - the clamp on the hose assembly requires a PEX clamp tool, it's not the kind with a screw, if you don't have a PEX clamp tool, or don't want to buy one, you'll need to find a 5/16 wide clamp of the right diameter (over 1", but I don't know the exact size) online somewhere - Home Depot/Lowes near me didn't have them. Second, when you reinstall the "Diverter, Motor" do it with the dishwasher completely upside down. I tried doing it with the dishwasher just on its side and could not get it in all the way. As soon as I put the dishwasher upside down it went in properly.
BernieS, Utica, NY
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 1 - 2 hours
Yes, I would recommend this to a friend
Dishwasher
Repairman installed and wow clean dishes again!! Thx Sears for having the part in stock.
Clean d, Peterson,MN
Did you find this review helpful?
- Ease of Installation
- Very Difficult
- Duration of Installation
- More than 2 hours
Yes, I would recommend this to a friend
Damaged
They take very little into account when packaging these items. Pump finally arrived smashed beyond repair. Guess I'll wait another 10 days to have a new pump delivered.
Sean, Nj
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- More than 2 hours
Yes, I would recommend this to a friend
Easy and exact
Simple and fairly easy to install, works great. Was an exact fit.
Riloh, Indiana
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Pump works great!
The original clamps were a bit of a pain so I replaced them with different band clamps. It works great and it's nice to not hand wash dishes anymore!
Jeff, Rockford, Il
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour
Did the job
My Whirlpool washer would fill and drain but wouldn't circulate water or run the jets. I bought this Pump & Motor to fix it. Getting the washer out and flipping it over was a pain (get a bunch of towels) but installing the pump was relatively easy. The pump itself comes with a pinch/Oetiker-style clamp already installed - you either need to replace it with a worm clamp or buy a pair of pinch pliers. I bought a pair of Knipex pliers for the job and it was simple. Washer is back to functioning again.
Shart_Attack, Austin, TX
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Easy to install
Took a special tool for clamps. Any DIY can figure it out.
Stan, Arkansas
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend