$20.99 |
22% OFF Phone Price : $26.99
CONFIRM THE PART FITS
Part Information
This recoil starter pulley kit (part number 545008049) is for line trimmers.
Recoil starter pulley kit 545008049 spins the flywheel to start the engine.
Wear work gloves to protect your hands when installing this part.
Frequently Used Together
Top models using the same part
| Model Name | Model Number | Diagram Name |
|---|---|---|
| Model #PPB335 TYPE 3 Poulan gas line trimmer | PPB335 TYPE 3 | Cylinder/fuel tank/crankshaft |
| Model #PP338PT TYPE 2 Poulan gas line trimmer | PP338PT TYPE 2 | Cylinder/fuel tank/muffler |
| Model #PPB335 TYPE 1 Poulan gas line trimmer | PPB335 TYPE 1 | Cylinder/fuel tank/crankshaft |
| Model #PPB335 Poulan gas line trimmer | PPB335 | Cylinder/crankshaft/crankcase |
| Model #PPB330 TYPE 1 Poulan gas line trimmer | PPB330 TYPE 1 | Cylinder/crankshaft/fuel tank |
| Model #PP333 TYPE 1 Poulan gas line trimmer | PP333 TYPE 1 | Cylinder/fuel tank/muffler |
| Model #358791140 Craftsman gas line trimmer | 358791140 | Fuel tank/cylinder/muffler |
| Model #PPB330 TYPE 3 Poulan gas line trimmer | PPB330 TYPE 3 | Cylinder/crankshaft/fuel tank |
| Model #PP335 TYPE 1 Poulan gas line trimmer | PP335 TYPE 1 | Cylinder/fuel tank/muffler |
| Model #PP033 TYPE 1 Poulan gas line trimmer | PP033 TYPE 1 | Cylinder/fuel tank/muffler |
Reviews
Easy to install
Did not work right the first time but customer service took care of it to replace it.
Undisclosed, Va
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Returned
Actually I returned it. There is a complete assembly available at a lower cost.
vn t, Michgan
Did you find this review helpful?
- Ease of Installation
- Difficult
- Duration of Installation
- 1 - 2 hours
Yes, I would recommend this to a friend
Perfect
Perfect fit. A snap to install. You don't need to be a pro.
LeoPG, Connecticut
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- 30 minutes - 1 hour
Installation caution
Be very careful when removing old pulley to release all tension in the take-up spring (by allowing pull cord to be completely taken up by removing it from handle), otherwise it will pop out and is very difficult to re-install). I learned this the hard way. If the tension is released then the installation is easy since the take -up spring should remain in position. The take-up spring is not the spring that forms part of the pulley assembly, but is the spring (kind of like a clock spring) that returns pulley to retracted position once it has been pulled.
Emjen, New York
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour