CONFIRM THE PART FITS
Part Information
This primer bulb kit (part number 530071835) is for chainsaws.
Primer bulb kit 530071835 circulates fuel to the carburetor to provide quicker starting. The kit may include multiple parts; refer to your parts diagram for a complete list of parts included.
Wear work gloves to protect your hands and work in a well-ventilated area during this repair.
Top models using the same part
Model Name | Model Number | Diagram Name |
---|---|---|
Model #2150 TYPE 6 (RECON) Poulan gas chainsaw | 2150 TYPE 6 (RECON) | Shield/cylinder/muffler |
Model #2375 TYPE 1-5 (RECON) Poulan gas chainsaw | 2375 TYPE 1-5 (RECON) | Cylinder/crankshaft/crankcase |
Model #2150 TYPE 1-5 Poulan gas chainsaw | 2150 TYPE 1-5 | Shield/cylinder/crankshaft |
Model #2050 TYPE 6 (RECON) Poulan gas chainsaw | 2050 TYPE 6 (RECON) | Shield/cylinder/muffler |
Model #2055 TYPE 1-5 Poulan gas chainsaw | 2055 TYPE 1-5 | Shield/cylinder/crankshaft |
Model #350360171 Craftsman gas chainsaw | 350360171 | Cylinder/shield/carburetor |
Model #2175 TYPE 1-5 Poulan gas chainsaw | 2175 TYPE 1-5 | Shield/cylinder/crankshaft |
Model #1950 TYPE 1-5 Poulan gas chainsaw | 1950 TYPE 1-5 | Shield/cylinder/crankshaft |
Model #2150 TYPE 1-5 (RECON) Poulan gas chainsaw | 2150 TYPE 1-5 (RECON) | Cylinder/crankshaft/crankcase |
Model #358350561 Craftsman gas chainsaw | 358350561 | Shield/cylinder/crankshaft |
Reviews
Exact replacement primer bulb.
Repair was very easy. I already had it apart for repair.
Sawman, Boynton Beach Fl
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
Yes, I would recommend this to a friend
Easy to install
Easy to install...nice that it had on the backside where to connect fuel lines
Mike, Little Rock
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Parts and instructions great
Took a little while to install parts. About 2 1/2 hours. Reason being all the fuel lines had broken into small pieces, could not tell which ones went where. After finding diagram, it went well.
Joe's h g, Glenpool, Ok
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 1 - 2 hours
Yes, I would recommend this to a friend
The part does not fit.
Do not order from Sears!! I gave them all of the information on my Sears chainsaw including model number, size and name.
Chainsaw p b, Zwolle, LA
Did you find this review helpful?
- Ease of Installation
- Very Difficult
- Duration of Installation
- More than 2 hours
Yes, I would recommend this to a friend
Low effort fix to a small disaster
Very good instructions included, if you can read you can fix it
Tudor28, Bassett, Va
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
Yes, I would recommend this to a friend
Retired
Very easy to install.... Took maybe 5-7min to install.
Bob7, Edmond, OK
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
Yes, I would recommend this to a friend
Great replacement and easy installation
Very easy to replace. Fits perfect and most important works great. No problems starting chain saw after installing.
Mongo, Laredo, TX
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
Yes, I would recommend this to a friend
Easy to install
Piece of cake, 5 min and back to operating mode. NO repair places anywhere near me had this part.
JetRep, LA - Lower Alabama
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
Yes, I would recommend this to a friend