CONFIRM THE PART FITS
Part Information
This blade (part number 742-0544B) is for chipper/shredders.
Wear work gloves to protect your hands when installing this part.
Top models using the same part
| Model Name | Model Number | Diagram Name |
|---|---|---|
| Model #247776360 Craftsman chipper/shredder | 247776360 | Impeller assembly |
| Model #45-0249-2 Agri-Fab lawn vacuum | 45-0249-2 | Impeller/blade-chipper |
| Model #502492VAC Agri-Fab lawn vacuum | 502492VAC | Impeller housing assembly |
| Model #24A-494B063 Troybilt chipper/shredder | 24A-494B063 | Upper and lower hopper |
| Model #24A-494G063 Troybilt chipper/shredder | 24A-494G063 | Upper and lower hopper |
| Model #247775890 Craftsman chipper/shredder | 247775890 | 10 h.p. chipper shredder |
| Model #494 Troybilt chipper/shredder | 494 | Upper and lower hopper |
| Model #24A-204B063-2002 Troybilt chipper/shredder | 24A-204B063-2002 | Impeller/housing, inner flail |
| Model #247799640 Craftsman chipper/shredder | 247799640 | Impeller assembly |
| Model #48624517 Craftsman chipper/shredder | 48624517 | Impeller housing assembly |
Reviews
Chipper blades
Purchased a used chipper/shredder that needed the chipper blades replaced. Ordered the blades & now it works like it should. Shipping was 2 days later than estimated.
PinkWarriorPatriot, Iowa
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
Yes, I would recommend this to a friend
chipper Blades
This is the second set of blades I've put on the chipper. The last set was better because the blades were coated to prevent rust. These are not. The blades are sharp though and so far have performed well. The most time consuming part of the install was cleaning the packed wood dust/particles out of the allen head screws. Almost like trying to clear cement or glue out of it. Once I got the heads clean and broke torque on them they came out fairly easy. Next time I'm going to replace the screws as well as it is too easy to damage the head if you don't get all of the debris out the allan hole. I'm going to keep the old set of blades and resharpen them.
Scottchipper?, Undisclosed
Did you find this review helpful?
- Ease of Installation
- Difficult
- Duration of Installation
- 1 - 2 hours
Yes, I would recommend this to a friend
Great Service and Product
Shipping time was great and the blades were exactly what I wanted. They were also the best price I could find!
Farmer K, Tennessee
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend