CONFIRM THE PART FITS
Part Information
This ground drive belt (part number 954-04201A) is for snowblowers.
Ground drive belt 954-04201A connects the engine pulley to the transmission pulley to move the snowblower forward.
Wear work gloves to protect your hands when installing this part.
Frequently Used Together
- $32.27 |Â16% OFFÂ Phone Price : $38.27
- $7.77 |Â11% OFFÂ Phone Price : $8.77
- $10.56 |Â16% OFFÂ Phone Price : $12.56
- $34.89 |Â15% OFFÂ Phone Price : $40.89
- $57.08 |Â10% OFFÂ Phone Price : $63.08
- $13.84 |Â13% OFFÂ Phone Price : $15.84
- $41.04 |Â13% OFFÂ Phone Price : $47.04
- $85.96 |Â7% OFFÂ Phone Price : $91.96
- $5.42 |Â16% OFFÂ Phone Price : $6.42
- $246.46 |Â5% OFFÂ Phone Price : $258.46
Top models using the same part
Model Name | Model Number | Diagram Name |
---|---|---|
Model #31AH55TH799 MTD gas snowblower | 31AH55TH799 | Transmission/wheels |
Model #31AH5DTH793 MTD gas snowblower | 31AH5DTH793 | Engine drive |
Model #CMXGBAM1054544 Craftsman gas snowblower | CMXGBAM1054544 | Engine drive |
Model #31AS5BHE799 MTD gas snowblower | 31AS5BHE799 | Handles |
Model #31AH55TH793 MTD gas snowblower | 31AH55TH793 | Engine/wheel/gear |
Model #247985390 Craftsman gas snowblower | 247985390 | Engine/wheel/gear |
Model #247887910 Craftsman gas snowblower | 247887910 | Drive/wheels |
Model #247985380 Craftsman gas snowblower | 247985380 | Engine/wheel/gear |
Model #247888701 Craftsman gas snowblower | 247888701 | Handles/engine |
Model #247529180 Craftsman gas snowblower | 247529180 | Drive system |
Reviews
Quick service
My old snowblower belt is wearing down so I ordered a new one. The checkout said it would fit the model number of my Craftsman snowblower. I hope it does fit! I haven't replaced the belt yet but will need to do it soon. It takes an hour or two to install.
Tommy, Michigan, UP
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 1 - 2 hours
Yes, I would recommend this to a friend
Typical auger belt replacement
The repair took about 45 minutes total. Removed the 4 bolts to separate the auger unit from the drive, but I also replaced the drive belt which added time to the disassembly. Once the unit was separated, I removed the auger pulley to install the belt. Removed the lock collar from the movable drive disc and then removed disc and drive belt, installing new drive belt and reinstalling moveable disc.
Mechanical.Me, New York
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
drive belt for craftsman snowblower
Very happy on the quick response and shipping on my belt
milkweedboy, flagstaff az
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
To expensive.
Buy it elsewhere!!!!! Search on you tube. You will find many videos with very good explanations of how to replace belts and friction wheel
Rpsh, Wisconsin
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 1 - 2 hours
Yes, I would recommend this to a friend
Easy installment
It was installed with no swearing & took about 30 minutes.
Sowbelly, Twig, mn.
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
Install was a bit complicated, but reviewed u tube
the video was a must, a couple of steps must be in sequence to suceed
cliffwisman, eastern washington
Did you find this review helpful?
- Ease of Installation
- Difficult
- Duration of Installation
- 30 minutes - 1 hour