CONFIRM THE PART FITS
Part Information
This start/stop switch (part number 574608801) is for chainsaws.
Start/stop switch 574608801 opens or closes the electrical circuit to allow the engine to start or stop.
Wear work gloves to protect your hands when installing this part.
Top models using the same part
| Model Name | Model Number | Diagram Name |
|---|---|---|
| Model #358341190 Craftsman electric chainsaw | 358341190 | Electric chain saw |
Reviews
Chainsaw start/stop switch.
The chainsaw switch restored my much used Sears chainsaw to a working condition and the installation was easy. Would recommend this supplier.
Jerry G, Newport, Oregon
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
Installed with sucess!
success! Chain saw stopped working most people would throw out, but it was working well. I disassembled and tested the faulty switch. I ordered one but it was on backorder more than 6 weeks I ordered one and paid for it and just recently received it in the mail A quick assembly and it was back in business.
John41820, Temecula, California
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
old electric chainsaw revitalized
older model makes it hard to find parts, this was not the exact part but it works. thanks
Undisclosed, cumberland, maryland
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
REPLACEMENT SWITCH
I HAVE A CRAFTSMAN 14INCH 2.5 HP ELECTRIC CHAIN SAW. (MODEL 358.341141) the switch on this model broke and needed to be replaced. The switch (P/N 2-623814-01) for this model was discontinued with no replacement. I took the above switch and modified the housing of the chain saw handle, to make this switch work. The housing of the chain saw model already had a gusset on the inside of the housing to provide for the switch safety button. All you need to do is drill it out. The wiring for this switch was very easy to install with the screws. The width of this switch was the same as my old switch. So it was very easy to put the chain saw back together. I now have a chain saw that is fully restored and up and running.
john c s r, Undisclosed
2 people thought this review was helpful.
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour
Fairly easy to install.
Basic hand tools to install, snap ring pliers required.
Yeeper, DH Springs, CA
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour
very easy
yes it only about 20 min to install a new switch in my electric chain saw now it works again
daffy, co,
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- 30 minutes - 1 hour
Right Part and easy to install
removed half cover replaced switch, reassembled, worked like a new saw
Bill J, Alabama
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes