$3.99
CONFIRM THE PART FITS
Part Information
This ramp wheel (part number 206612) is for ellipticals.
Ramp wheel 206612 allows for the proper movement of the handlebars on the elliptical.
Follow the instructions in the manual when installing this part. Wear work gloves to protect your hands.
Frequently Used Together
- $23.69 |20% OFF Phone Price : $29.69
- $3.14 |24% OFF Phone Price : $4.14
- $3.89 |20% OFF Phone Price : $4.89
- $50.99
- $77.49 |7% OFF Phone Price : $83.49
- $62.49 |9% OFF Phone Price : $68.49
- $4.69 |18% OFF Phone Price : $5.69
- $228.62 |5% OFF Phone Price : $240.62
Top models using the same part
| Model Name | Model Number | Diagram Name |
|---|---|---|
| Model #DRE13041 Proform elliptical machine | DRE13041 | All parts |
| Model #PFEL13031 Proform elliptical machine | PFEL13031 | All parts |
Reviews
Elliptical Wheels, 1/2 cost of elsewhere
Good product & decent delivery time. Product exactly as described and cost elsewhere was double the price paid via Sears Direct.
Glenn, KC, MO
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
Like New
Never realized how noisy the elliptical had gotten over the years. Can hear my TV again. Easy to install. No problems so far after 2 months
CincyMike, Cincinnati
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Pretty easy to install
It took about 15 min to install. The first one took 10 just trying to figure it out but the second less than 5 min
Jess, Az
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Better than OEM
Half the price of, what appears to be, the same wheel from other vendors. For easiest installation, remove the handlebar from the upright at the pivot using Philips screwdriver and M8 hex wrench, then remove M8 locknut from pivot shaft (wheel axle). Alternatively, remove M8 locknut from pivot shaft (wheel axle) and pull apart until wheel slides off.
Retread, Phila., PA
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Expected to get 2 for this price.
It doesn't make much sense to only replace one roller at a time. At least it's a new design that looks less likely to explode.
Bobb, PA
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
Yes, I would recommend this to a friend
Better than OEM.
Better than OEM. Fairly straightforward install (you will get messy from the grease on the elliptical). Metal, not plastic.
Undisclosed, Haddonfield, NJ
1 person thought this review was helpful.
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Easy to install
Little time to install maybe 5 minutes, but the product is junk.
Prof D, NE Ohio
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
Works better than original
higher quality than oem wheel by nordictractk--not difficult to install, as other reviews said. Only 1 wheel per purchase so order 2!
BenMWilson92, Undisclosed
1 person thought this review was helpful.
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour