Can’t find your part?   Contact us:
+1-309-603-4777
Sears Parts Direct
Tips to find your model number
Orders

  • Keep track of the models you own in your profile

    Sign in or Register to view or add models

Schedule a repair

CONFIRM THE PART FITS

Refrigerator Dispenser Ice Chute Door Hinge Lever 69675-7

Refrigerator Dispenser Ice Chute Door Hinge Lever 69675-7

Part #69675-7

This part is no longer available.

We've permanently sold out of this part. It's no longer available from the manufacturer and the manufacturer has no substitute for this part. Although our call center staff is always happy to help when possible, they don't have access to this part. If you can't find that part and decide to replace the product, we invite you to visit www.sears.com

This part fits

Part Information

This dispenser ice chute door hinge lever (part number 69675-7) is for refrigerators.

Dispenser ice chute door hinge lever 69675-7 holds the ice chute door and allows the door to pivot.

Unplug the refrigerator and safely store any food that could deteriorate while the power is off before installing this part. Wear work gloves to protect your hands.

Frequently Used Together

Top models using the same part

Model NameModel NumberDiagram Name
Model #GS20B6C3EV Maytag side-by-side refrigeratorGS20B6C3EV
Ice & water dispenser
Shop Parts
Model #GS20C6C3EV Maytag refrigeratorGS20C6C3EV
Ice & water dispenser
Shop Parts
Model #SILVER22 Maytag refrigeratorSILVER22
-
Shop Parts
Model #RSW2700EKE Maytag refrigeratorRSW2700EKE
Ice & water dispenser
Shop Parts
Model #KGU6651 Maytag side-by-side refrigeratorKGU6651
Ice & water dispenser
Shop Parts
Model #RSW2400CKL Maytag refrigeratorRSW2400CKL
Ice & water dispenser (rev.11)
Shop Parts
Model #SILVER24 Maytag refrigeratorSILVER24
Ice & water dispenser
Shop Parts
Model #RSW2400EKM Maytag refrigeratorRSW2400EKM
Ice & water dispenser
Shop Parts
Model #RSW2700EKM Maytag refrigeratorRSW2700EKM
Ice & water dispenser
Shop Parts
Model #GC20C8C3EV Maytag side-by-side refrigeratorGC20C8C3EV
Ice & water dispenser
Shop Parts

Reviews

stock part
December 27, 2020

Easy to install. Doesn't last more than a few years so I keep one on hand. A design flaw, not a supplier problem!!

Jack, Hampton,VA.

Did you find this review helpful?

Ease of Installation
Easy
Duration of Installation
30 minutes - 1 hour

Yes, I would recommend this to a friend

Delivered a day earlier than estimated.
March 26, 2018

2nd time to replace this part, so I already knew the steps required. Remove phillips screw holding the front cover in place. Then with screw taken out, slide the cover to one side. 4 screws (#15 torx) allow removal of the dispenser. Remove old unit. Door and pad have to be moved over (no access to the screw head, so the cover has to be peeled back). Put door and pad on new hinge lever. Connecting the two springs requires small hands or a helper. Tighten the solenoid's ram screw to the hinge lever, replace the dispenser and 4 screws and the cover and retaining screw. Done!

FridgeGuy, Ohio

Did you find this review helpful?

Ease of Installation
Moderate
Duration of Installation
30 minutes - 1 hour

Parts & More