CONFIRM THE PART FITS
Part Information
Basic Information
- Part Name:Dryer Heating Element Assembly
- Manufacturer:Samsung
- Category:Dryer Replacement Parts
- Primary Function:This component is responsible for generating the heat required to dry clothes in a Samsung dryer.
Technical Specifications
- Dimensions:The assembly is approximately 12 inches in length, 11 inches in width, and 7 inches in height.
- Power Rating:Typically rated at 240 volts and can consume around 5300 watts.
- Material:Constructed primarily from metals such as nickel and chromium (for the heating element) and durable plastic and metal for the housing and supports.
Installation & Compatibility
- Compatible Models:Fits a variety of Samsung dryer models including, but not limited to, DV210AEW/XAA, DV42H5200EP/A3, DV42H5000EW/A3, DV45H7000EW/A2.
- Installation Difficulty:Medium - Installation requires disassembling the dryer, removing the previous heating element, and securing the new one in place. It is recommended for individuals with some DIY experience or technical knowledge.
- Tools Required:Standard screwdriver set, needle-nose pliers, and possibly a multimeter for testing.
Additional Information
The DC97-14486A Dryer Heating Element Assembly is a complete and ready-to-install unit that includes the heating element, housing, ducts, and thermostats/thermal fuses pre-assembled. It is a common replacement part for Samsung dryers that no longer produce heat or produce insufficient heat. When installing, ensure the power to the dryer is disconnected to maintain safety. It's also advisable to clean the lint and debris from the dryer's ducts to prevent future heating issues or potential fire hazards. After installation, verify the proper operation by running a test cycle. If the dryer still does not heat up, there may be additional issues with the thermal fuse, wiring, or electronic control board.
Frequently Used Together
- $48.68 |Â11% OFFÂ Phone Price : $54.68
- $25.82 |Â19% OFFÂ Phone Price : $31.82
- $25.87 |Â19% OFFÂ Phone Price : $31.87
- $40.58 |Â13% OFFÂ Phone Price : $46.58
- $32.20 |Â16% OFFÂ Phone Price : $38.20
- $33.45 |Â15% OFFÂ Phone Price : $39.45
- $240.47 |Â5% OFFÂ Phone Price : $252.47
- $32.19 |Â16% OFFÂ Phone Price : $38.19
- $217.02 |Â5% OFFÂ Phone Price : $229.02
Top models using the same part
Model Name | Model Number | Diagram Name |
---|---|---|
Model #DV50F9A6EVW/A2-00 Samsung dryer | DV50F9A6EVW/A2-00 | |
Model #DV456ETHDSU/AA-00 Samsung dryer | DV456ETHDSU/AA-00 | |
Model #DV48H7400EW/A2-01 Samsung dryer | DV48H7400EW/A2-01 | |
Model #DV50F9A7EVP/A2-00 Samsung dryer | DV50F9A7EVP/A2-00 | |
Model #DV456EWHDSU/AA-01 Samsung dryer | DV456EWHDSU/AA-01 | |
Model #DV316BEC/XAA Samsung dryer | DV316BEC/XAA | Blower/heater/motor |
Model #DV316BEW/XAA Samsung dryer | DV316BEW/XAA | Blower/heater/motor |
Model #DV3C6BEW/XAA Samsung dryer | DV3C6BEW/XAA | Blower/heater/motor |
Model #DVE45T3400V/A3-00 Samsung dryer | DVE45T3400V/A3-00 | Main assy |
Model #DVE50R5400W/A3-00 Samsung dryer | DVE50R5400W/A3-00 | Main unit |
Reviews
Easy DIY and saved the hassle of a repair man.
Our dryer stopped making heat. I have never touched or worked on an appliance before. After finding videos online I figured this was more than likely the cause of the no heat. Surprisingly it was not hard to take off the back/front panels to the dryer. Sure enough the heating element was broken. I ended up buying this entire assembly because I figured the two other parts associated with the element are 10+ years old so why not just completely replace the entire unit... (drop in). Overall this was an easy install and very manageable for someone at home. Be careful with the edges though, they are sharp and I did end up cutting up my hand in places.
Nigel, VA
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Dryer Heater Unit - simple plug and play
Removed the old burned-out unit and installed the new unit, connected the terminals and the dryer is back up and running. Thank You, Bob
Bob G, Fishers, Indiana
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Worked great, shipping was fast
One day my dryer stopped drying the clothes. So I opened it up and tested continuity on the heater assembly and sure enough the element went out. I could either replace the element for $145 or the sensor, fuse, and element for $150, so I bought this part. It fit perfectly, part worked right away and shipping was fast. Very happy to get the family dryer back up and running. Cheaper than a new dryer.
Kevin, Denver, CO
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Best parts
Perfect fit and fixed the issue. Much cheaper than a new dryer.
Ronald, Azle, TX
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Heating Element
Easy to install, no need to put anything together as it came as one piece, and worked great.
Jordan T, DFW, Texas
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour
Dryer Heating Element
Perfect Part! I have replaced this part with non-OEM parts twice and they last about 3 months. We have four sons so we do a lot of laundry. Hope this OEM part lasts longer than 3 months. I put these in so often I can put them in 15 minutes. Make sure to line up the dryer drum belt.
James S, Klamath Falls, Oregon
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
Heating Element
My dryer stops heating. Order this part as a replacement. Changed it out within about 45 minutes and now works perfect!
Spencer, Arkansas
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
HEATING MY DRYER
Thanks for the part, it worked great and it came when you said it will get here. thanks!
Moises, Aubrey TX
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- Less than 30 minutes