Can’t find your part?   Contact us:   +1-309-603-4777
Open Hamburger Menu
Sears Parts Direct
Tips to find your model number
Cart
Orders
Your models

Keep track of the models you own in your profile

Sign in or Register to view or add models

Schedule a repair
Kenmore Range microwave combos

Official Kenmore range/microwave combo parts

Kenmore builds safe and reliable range/microwave combos to help you cook the best meals. Precise controls on Kenmore range/microwave combos help you control heat to attain outstanding cooking results. When your Kenmore range/microwave combo breaks down, Sears PartsDirect is here to help with repair parts and technical advice that can get your range working again.

How to replace the oven temperature sensor in your Kenmore range/microwave combo

  • Shut off electrical power to the range.
  • Remove the oven racks.
  • Remove the screws from the base of the temperature sensor probe.
  • Carefully pull the oven temperature sensor probe forward into the oven interior. The wires connected to the probe have enough slack that you can pull it a just few inches. Holding the connector with needle-nose pliers, depress the locking tab on the plug and disconnect the plug from the sensor probe. Don't let the connector slip back through the hole, or you must remove the back panel of the oven to retrieve it.
  • While holding the connector with a pair of needle-nose pliers, snap it into the plug of the new probe. Push the wire into back wall of the oven. Position the new sensor probe and line up the holes for the mounting screws. Insert the mounting screws and tighten firmly using a nut driver.
  • Reinstall the oven racks and restore electrical power to the range.

How to fix your Kenmore range/microwave combo when it won't work at all

When your range/microwave combo doesn't work at all, it's likely that the range has no electrical power for the display or controls. Possible causes are a tripped house circuit breaker for the range, a problem with the outlet cord (not plugged in or broken) or an internal wiring failure. A blown thermal fuse can prevent the control from powering up on some ranges. Some ranges have a relay control board that supplies power to the display and controls so a failed relay control board could prevent the range from working.

Unplug the range and check he terminal block on the back of the range for loose wires or broken terminals. Replace the terminal block if damaged.