Can’t find your part?   Contact us:
+1-309-603-4777
Sears Parts Direct
Orders

  • Keep track of the models you own in your profile

    Sign in or Register to view or add models

Schedule a repair
Murray Chipper shredders

Official Murray chipper/shredder parts

Murray chipper/shredders make quick work of brush and branch disposal. Sharp blades in your Murray chipper/shredder cut through any type of debris that you load in the chute. When your Murray chipper/shredder isn't working as it should, get the replacement parts you need to fix the machine at Sears PartsDirect.

Common replacement parts for Murray chipper/shredders

  • Engine air filter. The engine air filter cleans the air entering the carburetor. Replace the air filter periodically, following the guidelines in the owner's manual.
  • Carburetor. The engine carburetor mixes air and gas before the fuel mix goes to the cylinder for combustion.
  • Recoil starter. The recoil starter spins the crankshaft to start the engine when you pull the rope.
  • Engine gasket set. The engine gasket set includes all of the seals and gaskets for the engine on your chipper/shredder. Replace any gaskets that are damaged or leaking.

Installing the hopper on your Murray chipper/shredder

  • Attach the hopper to the rotor housing. Make sure that you engage the metal lip of the hopper liner inside the rotor housing.
  • Secure the hopper to the rotor housing using the mounting bolts and washers. Don't tighten the mounting bolts at this time.
  • From inside the hopper, install the mounting bolts and washers into the upper lower holes of the metal hopper liner. Finger tighten the bolts at this time.
  • Make sure that the hopper is seated correctly on the chipper/shredder then tighten all mounting bolts firmly.

Parts & More