Lawn & Garden Equipment Engine Recoil Starter Rope, 98-in (replaces 1258, 28288, 28358, 28528, 30971, 31285, 31395, 31396, 31696, 590451A, 590456, 590527, 730608, 740032) 590535

Back to work

Fairly easy to replace the starter cord on this model of blower.

Ease of Installation

Moderate

Duration of Installation

30 minutes - 1 hour

Not to bad to install

Took about 22 minutes, remove pull start from machine and replaced cord.

Ease of Installation

Moderate

Duration of Installation

30 minutes - 1 hour

Yes, I would recommend this to a friend

Vintage lawn equipment repair

Craftsman edger with Briggs and Stratton still running strong and was able to still get parts though internet

Ease of Installation

Very Easy

Duration of Installation

Less than 30 minutes

It's simple!

I thought it was going to be so hard to do but it was actually quite easy. You just need a pair of needle nose pliers and a screwdriver or something thin like that to hold the wheel in place after you wind up the tension. Really easy!

Ease of Installation

Very Easy

Duration of Installation

30 minutes - 1 hour

Rope was as described

Secret to fishing the line through is a wire twist tie (from a bread bag). Downside...Shipping cost more then the item.

Ease of Installation

Moderate

Duration of Installation

30 minutes - 1 hour

Getting my snow blower ready for Winter

Had to remove a few screws and bolts from the chassis and that was it !

Ease of Installation

Very Easy

Duration of Installation

Less than 30 minutes

Pretty simple as long as you know what your doing

I had the old rope as a reference so it made it easy to figure out. The hardest part was taking off the metal stop. Took me about 40 minutes because I was taking my time.

Ease of Installation

Easy

Duration of Installation

30 minutes - 1 hour

pull cord replacement!

TOOK ABOUT A HOUR TO REPLACE PULL CORD AND OIL CHANGE! TWO HOURSALL SPARK PLUG! EASY!

Ease of Installation

Moderate

Duration of Installation

More than 2 hours