Sears PartsDirect is a leading supplier of replacement parts for Roadmaster fitness and exercise machines. Roadmaster fitness and exercise machines challenge you with a rugged workout on sturdy equipment. When parts wear out or break on your Roadmaster fitness and exercise machine, find the repair parts you need to fix the machine at Sears PartsDirect.
What to do when the control console display is dim on your Roadmaster elliptical exercise machine
Weak batteries, loose wires or a faulty console can cause a dim control console display on your elliptical.
In an elliptical that uses batteries to power the console, replace the batteries to restore brightness to the console display. Replace the batteries during routine elliptical maintenance to keep the control console display from going dim in the future.
If the display doesn't get brighter after replacing the batteries, you'll likely need to replace the console.
If your elliptical has a power cord, unplug the elliptical and check the power cord wiring connections to the control console. Reconnect any loose wires. If the power cord is damaged, replace it.
If the power cord and its wiring connections to the control console are okay, then you may need to replace the console because the display is faulty or the console isn't sending enough power to the display.
Troubleshooting your Roadmaster elliptical exercise machine when incorrect speed is displayed on the console
A problem with the reed switch, wiring failure or faulty console can cause the incorrect speed to be displayed.
Unplug the elliptical if it has a power cord and check the position of the reed switch if displayed speed is extremely slow when you're treading at a fast pace. The reed switch won't detect the crank arm pulley magnet if the switch is too far away from the pulley. Adjust the reed switch closer to the pulley so the reed switch detects the magnet and sends the proper speed signal to the console.
If the reed switch is properly positioned close to the crank arm pulley, check wiring between the reed switch and the console. Reconnect any loose wires and repair any broken wires.
If the wires are okay, you may need to replace the console because it isn't displaying the correct speed even though it's receiving the correct speed signal from the reed switch.
