Exercise Cycle Crank Bearing Set (replaces 176991, 244513) 295560

Easy to install

Took about 30 minutes, make sure bearings are orientated right and pedals move freely

Ease of Installation

Easy

Duration of Installation

30 minutes - 1 hour

Yes, I would recommend this to a friend

If you have worked on bikes stright forward

I had to fab a simple press with a C-clamp to install the outer bearing races, as was expected. It went together very well.

Ease of Installation

Very Easy

Duration of Installation

30 minutes - 1 hour

Yes, I would recommend this to a friend

Stationary bike

This was exactly what I needed to fix my stationary bike.

Ease of Installation

Moderate

Duration of Installation

30 minutes - 1 hour

Bearings

I been using my exercise bike for many years. I always kept extra parts-including bearings-just in case they wear out.

Ease of Installation

Easy

Duration of Installation

30 minutes - 1 hour

Yes, I would recommend this to a friend

Couldn't believe Sears part direct have in stock.

Purchase bearing for my indoor bicycle form this wed site. perfectly fit. Couldn't believe they have it in stock. Only this site/store has it. Came on time. Bought parts for my washer before. Will purchase from this site again.

Ease of Installation

Easy

Duration of Installation

30 minutes - 1 hour

Yes, I would recommend this to a friend

exact fit

fast delivery got part faster than expected and had some of the part assembled

Ease of Installation

Very Easy

Duration of Installation

Less than 30 minutes

Like a typical bicycle bottom bracket replacement

This is a somewhat difficult part to install, but feasible with some experience with non-sealed bicycle bearings and suitable tools. Special tools needed include a cotterless crank puller and a pair of thin 32 mm wrenches for adjusting the lock-nuts. I was fortunate to have these in my bicycle repair tool-kit. The bearing cups are a press-fit into the frame. The old ones were driven out carefully with a large punch and mallet. The new ones were driven in with a rubber mallet. As I disassembled the original bearing, I lined up the old parts in order on a towel, and assembled the new ones in the same order. Remember that the threads on the right end of the shaft are right-handed, and on the left end they are left-handed. When assembling the new bearings, fill them with grease, and adjust the lock-nuts so there is no play in the bearing, and it turns freely.

Ease of Installation

Difficult

Duration of Installation

1 - 2 hours

Needed some knowledge of bike mechanics and tools

Basically the same as changing out the crank assembly of a bicycle. Need a wrench and hammer to install the inner bearing races. But removing the pedal arms requires a puller. The reinstall is much easier.

Ease of Installation

Moderate

Duration of Installation

30 minutes - 1 hour