Official Thermador dishwasher parts

Troublshooting your Thermador dishwasher when it won't fill

A dishwasher that doesn't fill with water when you press Start is little more than a place to hide dirty dishes. First, make sure that the water supply cut-off valve is open. If it is, try this easy fix: check whether an object is preventing the overfill float from moving up and down freely. If the float is stuck in its highest position, the fill valve won't let water into the tub.

If that doesn't take care of it, the overfill float switch or water inlet valve may be broken. A failed electronic control board or timer could also prevent the dishwasher from filling.

What to do when your dishes aren't getting dry

Dishes typically dry by the end of the dishwashing cycle, with one exception-plastic items. Because plastic doesn't retain heat like glass, ceramic and metal, you'll almost always see drops of water on plastic items after the cycle finishes.

Rinse aid helps water drain off all dishes so they dry better. Make sure that you fill that rinse-aid dispenser when it's empty. Replace the dispenser assembly if it isn't dispensing rinse aid.

A heated drying setting also is an option to enhance drying. You may have this option turned off to save energy, but if your dishes aren't drying as well as you'd like them to, you might want to consider turning it back on. Consult your owner's manual and select the cycle options that fit your needs and your energy usage goals.

If your dishes don't get dry even though you've selected the heated drying option, then the heating element could be broken or the high-limit thermostat for the element may have tripped in error, preventing the element from heating. A malfunctioning vent or drying fan could also prevent dishes from drying.