Official Canadiana gas snowblower parts

Common repair parts for Canadiana gas snowblowers

• Shear pins. The shear pin is a fastener bolt that connects the auger to the rotating drive shaft. The shear bolt is made of soft metal that purposely shears off or breaks to protect the transmission and motor when a foreign object or hard-packed snow binds the augers.
• Scraper blade. The scraper blade is plate that runs along the bottom of the auger housing. It protects the auger housing and scrapes up snow the augers leave behind.
• Skid shoes. The skid shoes are two spacers that attach to each side of the auger housing and slide along the ground so the snowblower moves smoothly. They also elevate the auger housing so it clears the ground, protecting it from damage.
• Fuel filter. The fuel filter attaches to bottom of the fuel tank and connects to the fuel line. It filters particles from the gasoline as fuel moves from the tank to the carburetor.

Troubleshooting your Canadiana gas snowblower when its engine won't start

The snowblower engine needs gas, compression and spark to start, so if your snowblower isn't starting, focus on those. First, make sure the gas in the tank is fresh; older gas can form gummy deposits that interfere with starting. Gummy deposits clog the carburetor so clean or replace the carburetor if it's clogged. Check the fuel line and fuel filter and replace those components if clogged.

Another easy thing to check is the spark plug-if the spark plug is cracked or has a sooty electrode, replace it. Check the stop switch and replace it if it isn't allowing the spark plug to get current. A good engine tune-up that includes an oil change may help the engine start.

A failed rewind starter or electric starter won't spin the engine so replace those components if broken. For a quick compression test, remove the spark plug, cover the cylinder hole with your thumb and pull the starter rope. If you don't feel air against your thumb, you may need to adjust the valve lash. A damaged piston, piston rings, or cylinder could cause a compression problem—and it might be time for a service technician. Watch our snowblower engine won't start video for more troubleshooting tips.