Can’t find your part?   Contact us:
+1-309-603-4777
Sears Parts Direct
Orders

  • Keep track of the models you own in your profile

    Sign in or Register to view or add models

Schedule a repair
Samsung Video equipment

Official Samsung video equipment parts

You rely on your Samsung video equipment to provide the clear video playback you expect from video media. Samsung video equipment includes the features you look for in video electronics. When your Samsung video equipment isn't working properly, you can find the repair parts you need to fix the equipment at Sears PartsDirect.

Connecting your Samsung video equipment to the television

  • Refer to the user's manual of the television for information on connecting the video equipment to the television. Follow the user's manuals instructions on selecting the type of cable and television connection jack or jacks to use when connecting the video equipment to the television.
  • Turn off the video equipment and the television before connecting the video equipment to the television.
  • To connect the video equipment to the television using the HDMI cable, plug the HDMI cable into the HDMI Out jack on the video equipment. Plug the other end of the HDMI cable into the HDMI In jack of the television.
  • To connect the video equipment to the television using an HDMI-DVI cable and audio cable, plug the HDMI plug into the HDMI Out jack on the video equipment. Plug the DVI connector into the DVI In jack on the television. Connect the audio cable to the Audio Out jacks on the video equipment and the Audio In jacks on the television.

Troubleshooting your Samsung video equipment when the remote control doesn't work

  • Check the batteries in the remote control. Weak or dead batteries won't power up the remote device. Replace the remote control batteries if they're weak or dead.
  • The remote control has an effective range of about 20-feet. Make sure that you're within range of the video equipment when attempting to use the remote.
  • Check for items blocking the RF sensor on the video equipment and move any items out of the way to allow the video equipment to receive remote control RF signals.
  • The microprocessor inside the remote can fill up its internal memory or the microprocessor can get the memory scrambled at times. Reset the microprocessor and drain the memory in the remote by removing the remote control batteries and holding down one or more buttons on the remote device for several minutes. Reinstall the batteries and the remote may work normally again.
  • You may need to replace the remote if it won't work after resetting the microprocessor and it has good batteries.

Parts & More