Can’t find your part?   Contact us:
+1-309-603-4777
Sears Parts Direct
Orders

  • Keep track of the models you own in your profile

    Sign in or Register to view or add models

Schedule a repair
Fisher & Paykel Gas ranges

Official Fisher & Paykel gas range parts

Fisher & Paykel gas ranges have earned a reputation for reliability over the years. These ranges use top-quality burners and controls to make sure every dish turns out just right. When your Fisher & Paykel gas range isn't heating as it should, find the repair parts you need to fix the problem at Sears PartsDirect.

How to fix surface burners that aren't heating properly on your Fisher & Paykel gas range

If neither the oven burners nor the surface burners heat properly, then check the gas supply going to the range for properly supply pressure. Get help from your local gas supplier if supply pressure is deficient. A failing pressure regulator in the range can also prevent oven and surface burners from getting the right amount of gas. You may need to replace the pressure regulator if the gas supply to the range is good but gas pressure going to the oven and surface burners is weak.

For an individual surface burner not heating properly, check for and clear any clogs from the burner orifice. A failed surface burner control valve can also prevent a surface burner from heating properly. Replace the burner control valve if it won't control gas flow properly.

How to replace a Fisher & Paykel gas range spark igniter electrode

  • Shut off gas and electrical power to the range.
  • Remove the grates, burner caps and burner heads.
  • Remove screws that secure the top of the cooktop to the top of the burner orifice holders.
  • Release the mounting clips under the front edges of the cooktop then lift the cooktop off the range and set the cooktop aside.
  • Carefully disconnect the wire that's attached to the bottom of the spark igniter electrode.
  • Release the metal clip from the bottom of the gas burner orifice holder and remove the clip.
  • Remove the spark igniter electrode from the burner orifice holder assembly and discard it.
  • Install the new spark igniter electrode and reassemble the range.
  • Restore the gas supply and electrical power to the range.

Parts & More