Official Haier refrigerator parts

Most common Haier refrigerator parts that need replacing

• Compressor. The compressor is a positive displacement pump rotated by an electric motor. The compressor receives low-pressure refrigerant gas from the evaporator and rotates to compress that refrigerant to a high-pressure gas that moves through the condenser. The refrigerant gets hot when compressed by the compressor pump. The condenser is a heat exchanger that removes heat from the refrigerant gas and condenses it into a high-pressure liquid refrigerant. The high-pressure liquid refrigerant flows through the expansion device and into the evaporator that's at low pressure. The high-pressure refrigerant expands and evaporates. It absorbs the latent heat of vaporization as it changes from a liquid to a gas, which causes the cooling action in the evaporator. The refrigerant flows through the evaporator and back to the compressor where the cycles starts over.
• Compressor start relay. The compressor start relay starts the compressor and shuts off the compressor if the motor overheats. Replace the start relay if it's defective.
• Condenser fan. The condenser fan is in the machine compartment of your Haier refrigerator next to the compressor. It moves air across the condenser coils to help cool the hot refrigerant coming out of the compressor. The refrigerant is cooled before it moves through the expansion device and into the evaporator.
• Defrost heater. The refrigerator defrost heater melts frost from the freezer’s evaporator fins. Replace the defrost heater if it doesn't heat when activated.
• Defrost timer. The defrost timer is an electro-mechanical timer that controls the intervals between automatic defrost cycles in your Haier refrigerator. The defrost timer motor runs and moves the components in the device. When the contacts for the defrost cycle are engaged, the compressor stops and the defrost heater turns on briefly to melt frost from the evaporator fins. Removing the frost promotes a more efficient exchange of heat across that component. When the fins are defrosted, the contacts disengage, allowing normal cooling in the refrigerator.

Figuring out why you have frost build-up in the freezer of your Haier refrigerator

If frost is building up in the freezer, check first for a break in the door gasket that could be letting in warm, moist air. If the gasket seems sound, a malfunction somewhere in the automatic defrost system could be the culprit. A failed defrost timer or a bad electronic control board may not initiate the automatic defrost cycle, causing excessive frost buildup on the back wall inside the freezer. A faulty defrost sensor can prevent the defrost heater from turning on the defrost cycle. See how to check the defrost sensor and other components in the defrost system in our refrigerator won't cool troubleshooting video.

Find your Haier refrigerator parts on Sears PartsDirect

Sears PartsDirect offers a wide selection of parts for Haier refrigerators of all sizes, giving you what you need to fix broken models or keep running appliances in service. Look up the parts you need on the Haier refrigerator parts diagram for your model.