CONFIRM THE PART FITS

Freezer Door Gasket 5304507208

BEST SELLER

Part #5304507208

Replaced by #5304507199
?
Manufacturer substitution
This part replaces 5304507208. Substitute parts can look different from the original.
Online Only Price
$100.37 | 
11% OFF Phone Price : $112.37
In Stock
For ZIP codes near Edit
60-day return policy

Only ground shipment is available for this item.

Part Information

Basic Information

  • Part Name: Freezer Door Gasket
  • Manufacturer: Frigidaire
  • Category: Refrigeration System
  • Primary Function: Ensuring an airtight seal for the freezer compartment to maintain temperature and efficiency

Technical Specifications

  • Dimensions: Typically around 30 inches by 18 inches, but may vary depending on the specific freezer model
  • Power Rating: Not applicable (passive component)
  • Material: Rubber or similar synthetic elastomer with magnetic strips for adherence

Installation & Compatibility

  • Compatible Models: Compatible with select freezer models; please refer to the manufacturer's guide or contact support for a detailed list
  • Installation Difficulty: Easy to Medium, depending on the user's experience with appliance repair
  • Tools Required: Screwdriver, putty knife, and possibly a nut driver

Additional Information

The freezer door gasket is an essential component designed to replace worn or damaged seals on freezer doors. A compromised gasket can lead to cold air escaping, which causes the freezer to work harder, increasing energy consumption and potentially causing frost build-up. Users should routinely inspect their freezer door gaskets for signs of wear or damage, such as cracks, tears, or a loose fit.

Smooth folds and creases in gasket 5304507199 by soaking it in warm water or warming it with a hair dryer on low heat. Installation is typically straightforward and can be done without professional help. Ensure the gasket is properly aligned and seated to avoid gaps. A good seal is verified by the resistance felt when opening the freezer door after installation. Regular maintenance and prompt replacement of the gasket can extend the lifespan of the freezer and improve its efficiency.

This door gasket (part number 5304507199) is an original equipment manufacturer (OEM) part that fits some Kenmore and Kenmore Elite upright freezer models starting with 25321021, 25321041, 25321082, 25321111, 25323024, 25323082, 25323114, 25324042, 25324082, 25324092, 25326042, 25326052, 25326062, 25326072, 25326082, 25326092, 25327042, 25328042, 25328052, 25328062, 25328092, 25329082, 25329111, 25392802, 25392804, 25392808 and 25392811.

Also fits some Crosley models starting with CFUFH2, CFUM21, UL2100, UL2500 and UL5000; some Frigidaire models starting with AFFU2, F82U2, FFU20, FFU21, FKFH2, GLFH2, GLFU2, LFFH2, LFFU2, TFFU2 and UL500; some Gibson models starting with GFU20 and GFU21; and some Universal/Multiflex models starting with CFU21, MFU20 and MFU21.

Reviews

Perfect fit.
December 16, 2022

Fit perfectly and fixed the problem with frost buildup. Installation was easy but required removing the interior door panel, which is attached with a lot of screws, so it took a while.

Henry, Washington

Did you find this review helpful?

Ease of Installation
Easy
Duration of Installation
30 minutes - 1 hour

Yes, I would recommend this to a friend

Freezer Door Gasket
November 04, 2022

Worked perfectly. The door would not seal properly and condensation and frost would build up at the top of the freezer before replacing. I'd give it a 5 if it were not so over priced. The cost was ridiculous for a single gasket.

Mike, Great Mills, MD

Did you find this review helpful?

Ease of Installation
Moderate
Duration of Installation
30 minutes - 1 hour

Yes, I would recommend this to a friend

Easy install
October 30, 2022

Gasket worked perfectly! You don't need the clip kit

Rlittle111, Delhi ny

Did you find this review helpful?

Ease of Installation
Easy
Duration of Installation
30 minutes - 1 hour

Yes, I would recommend this to a friend

Freezer gasket
August 29, 2022

Despite letting it sit 48hrs in warm temperatures, trying a blow dryer on it to take out the twists, after carefully installing and repeatedly checking all screws that hold it in place, it still leaks ambient air into the freezer. It still frosts up around the door. Only about 10% won't straighten out for a good seal, but any leaking is a problem.

John, Az

Did you find this review helpful?

Ease of Installation
Easy
Duration of Installation
30 minutes - 1 hour

Yes, I would recommend this to a friend

Easy to install
February 13, 2022

Followed an online video. Very East to do only took about 20 minutes.

Hambone, Nacogdoches, Tx

Did you find this review helpful?

Ease of Installation
Easy
Duration of Installation
30 minutes - 1 hour

Yes, I would recommend this to a friend

Freezer Door Gasket
January 08, 2022

Sort of easy to install. We have an older freezer and the old seal needed to be replaced. Was happy that Sears still had the part available. We watched a few YouTube University videos to understand how to complete the project. It took us about an hour.

CJG1, Malone, New York

Did you find this review helpful?

Ease of Installation
Easy
Duration of Installation
30 minutes - 1 hour

Yes, I would recommend this to a friend

damaged on arrival
January 01, 2022

no advice. gasket was damaged did not seal. could not use as delivered

dissappointed, shelton wa

Did you find this review helpful?

Ease of Installation
Moderate
Duration of Installation
30 minutes - 1 hour

Yes, I would recommend this to a friend

Wrong gasket.
December 12, 2021

I entered the make & model number when ordering from Sears Parts Direct trying to find the correct door gasket but was disappointed.

Dino, Peoria AZ

Did you find this review helpful?

Ease of Installation
Moderate
Duration of Installation
30 minutes - 1 hour

Yes, I would recommend this to a friend