CONFIRM THE PART FITS
Part Information
Water heater burner assembly 9003381 is an original equipment manufacturer (OEM) part that fits Kenmore gas water heaters with model numbers that start with 153339.
Burner assembly 9003381 heats the water in the water tank.
This 40,000 BTU natural gas burner assembly includes the burner head, orifice, burner tube, inner door and inner door gasket.
Replaces original Kenmore burner assembly part 9003381005.
Frequently Used Together
- $25.71
Top models using the same part
Model Name | Model Number | Diagram Name |
---|---|---|
Model #153339361 Kenmore gas water heater | 153339361 | Gas water heater |
Model #153339362 Kenmore gas water heater | 153339362 | Water heater |
Model #153339420 Kenmore gas water heater | 153339420 | Water heater |
Model #153339462 Kenmore gas water heater | 153339462 | Water heater |
Model #153339262 Kenmore gas water heater | 153339262 | Water heater |
Model #153339460 Kenmore gas water heater | 153339460 | Water heater |
Model #153339211HA Kenmore gas water heater | 153339211HA | Gas water heater |
Model #153339461 Kenmore gas water heater | 153339461 | Gas water heater |
Model #153339261 Kenmore gas water heater | 153339261 | Gas water heater |
Model #153339411HA Kenmore gas water heater | 153339411HA | Gas water heater |
Reviews
No sweat easy install
No problem to install, worked just fine and saved me from buying another water Htr.
Brad, Hayward, California
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
perfect fit
It ''was'' easy to install. just make sure you don't muscule the gas lines on the burner assembly.
ionic, Syracuse NewYork
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Water Heater Burner
There was a little glitch on the website, but the online chat was very helpful.
Undisclosed, Cleveland, Ohio
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Burner Assembly Installation
The burner assembly works great, but installing it can be a real challenge. The assembly must be installed so it is sitting in the support while at the same time aligning the gas supply tube and the mounting screws. All this while lying on the floor working within the 3" clearance under the water heater. It took some time, but I was able to do it.
Undisclosed, Northern IL
Did you find this review helpful?
- Ease of Installation
- Difficult
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Did not work
My old worn out burner worked better..that one i only had to relight maybe once a week..this one wont stay lite for a few mins..total junk.
Dfat, Saint Cloud
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour
Installation of heating/burner
20 minutes. Gas line fit perfect and holds the Berber in place. Pilot light line and that no line were too long, rolled them around my flashlight handle to create a coil and install was a breeze.
Stuman, Bryan Ohio
1 person thought this review was helpful.
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
Easy to install
The new unit I bought from you would not light the pilot light. I replaced it with the old unit and the pilot light started working.
Buzzard, Adrian, Michigan
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
Easy to install...too bad the part was defective
I ordered the burner assembly. They sent me the entire burner assembly but it was missing a critical piece....the pilot burner which is the tip of the gas tube...they are definitely lacking quality control
Scottlin4, San Jose, CA
1 person thought this review was helpful.
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour