CONFIRM THE PART FITS
Part Information
This oven burner igniter (part number 74007498) is for ranges.
Oven burner igniter 74007498 ignites the gas to light the oven burner.
Unplug the range or shut off the house circuit breaker for the range before installing this part. Wear work gloves to protect your hands.
Frequently Used Together
- $37.37 |14% OFF Phone Price : $43.37
- $34.59 |15% OFF Phone Price : $40.59
- $65.79 |8% OFF Phone Price : $71.79
- $80.29 |7% OFF Phone Price : $86.29
- $31.35 |16% OFF Phone Price : $37.35
- $97.33 |11% OFF Phone Price : $109.33
- $4.39 |19% OFF Phone Price : $5.39
- $34.42
Top models using the same part
Model Name | Model Number | Diagram Name |
---|---|---|
Model #MBR4450BGH Maytag gas range | MBR4450BGH | Gas controls |
Model #MGR4450BDQ Maytag gas range | MGR4450BDQ | Gas controls |
Model #MGR4450BDW Maytag gas range | MGR4450BDW | Gas controls |
Model #MGR4410BDW Maytag gas range | MGR4410BDW | Gas controls |
Model #MGR4450BDA Maytag gas range | MGR4450BDA | Gas controls |
Model #MGR4410BDA Maytag gas range | MGR4410BDA | Gas controls |
Model #MGR4410BDQ Maytag gas range | MGR4410BDQ | Gas controls |
Model #MBR4450BGW Maytag gas range | MBR4450BGW | Gas controls |
Model #CGL1100ADW Magic Chef gas range | CGL1100ADW | Gas controls |
Model #CGL1100ADQ Magic Chef gas range | CGL1100ADQ | Gas controls |
Reviews
Bad information from service representative
The service repair person came to the house to assess the issue with the range. It was determined the ignitor was the problem. The price was too expensive to repair, I asked for the representative to write down the part number. I ordered the wrong part based on the information he provided. Will I be reimbursed the shipping and tax when the company receives the returned part?
Disappointed w S, ALBANY
Did you find this review helpful?
- Ease of Installation
- Very Difficult
- Duration of Installation
- More than 2 hours
Yes, I would recommend this to a friend
fixed the gas supply problem
The old ignitor still worked but not well enough to make the gas valve open properly with gas smells and not getting up to temperature
Phil_T, CA
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
Yes, I would recommend this to a friend
Range oven burner igniter
It's not hard but it is time consuming. If you decided to install this yourself I would have so lubricant in hand. The screws were rusted and had the apply a lubricant so I wouldn't snap them off.
Joethec, Staten Island
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Perfect fit
I had a gas smell at times when first using the oven. The ignite was not heating up fast enough, allowing gas to escape. This igniter was a perfect fit for the broiler. Remember there is a different one for the bake. The two are not interchangeable as the electrical connections are different.
Wayne, Colorado Springs, Colorado
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Yes, it was fairly easy to install.
The install took a bit longer because the existing mounting screws were stripped.
Ignitor, Montana
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Part didn't match my model number
The part ended up being a completely different part for the stainless steel model of my model number. I paid extra for fast shipping. When I ordered the part, it said Òin stockÓ, then I got an email saying my part would be delayed due to supply problems. They charged me the full fast shipping fee. Once I received the part and realized it didn't fit, I went back and did some research and found out the SS model number was actually different, despite my appliance number not being labeled as such. Advice: check to make sure your SS model doesn't have a different subset of parts. My model should have had a number 1 added to the end of the model number, mine does not.
DarleneS123, Ashtabula, OH
Did you find this review helpful?
- Ease of Installation
- Very Difficult
- Duration of Installation
- More than 2 hours
Yes, I would recommend this to a friend
Very easy to install
after checking out a couple of YouTube videos, I figured this was a quick and easy solution. I was right. Less than 10 minutes, and only tool I used was an electric screwdriver - two bolts. The wiring connector was a snap off, then snap on the new one.
LMH*, NC
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
Yes, I would recommend this to a friend
ignitor replacement
5 minute replacement and worked perfectly. also was nice cause i was able to clean stove out while there.
legend, knightstown, indiana
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
Yes, I would recommend this to a friend