CONFIRM THE PART FITS

Washer Water Inlet Valve (replaces 134637800, 7134637800, 7134637810) 134637810

Part #134637810

Online Only Price
$103.06
10% OFF Phone Price : $115.06
In Stock
For ZIP codes near Edit
60-day return policy

Part Information

This water inlet valve (part number 134637810) is for washers.

Water inlet valve 134637810 controls the water flow into the washer.

Unplug the washer and shut off the water supply before installing this part. Wear work gloves to protect your hands.

Reviews

Exact Replacement with easy replacement!
August 13, 2020

Perfect replacement and used U tube instruction to make easy change out.

Undisclosed, League City, Texas

Did you find this review helpful?

Ease of Installation
Very Easy
Duration of Installation
30 minutes - 1 hour

Yes, I would recommend this to a friend

Bad Washer Water Inlet Valve Causing Water to Leak
June 01, 2020

Washer was leaking into drum in between washes. Determined, by shutting off water, that it was a bad washer water inlet valve. Ordered OEM replacement valve from Sears, which arrived in 3 days. Install was fairly easy, taking about 2 hours to remove the old valve and replace with new valve. Water leak was resolved by replacing the valve.

jlroth5, Nashville, TN

1 person thought this review was helpful.

Ease of Installation
Moderate
Duration of Installation
More than 2 hours

Yes, I would recommend this to a friend

Water Intake valve for Electrolux washer
April 21, 2020

Great OEM product. The product was great. Only gave a 4 star rating because of how it was packaged in the box for shipping was not the best.

Matty25, Seattle, WA

Did you find this review helpful?

Ease of Installation
Easy
Duration of Installation
30 minutes - 1 hour

Yes, I would recommend this to a friend

Fixed intermittent no water isse
September 10, 2019

need square drive bit and a long (12") phillips makes things easier

Niteclicks, oklahoma

Did you find this review helpful?

Ease of Installation
Easy
Duration of Installation
30 minutes - 1 hour
Install took about 30 minutes,
February 26, 2019

The top comes off with two screws in the back, and slides. You need a square bit for your driver. The water valve comes off with three screws under the tubes. Little hard to get on them, but with shorter driver now problem. I took out the cip that holds vent tube and water inlets in place first so I could get more room by taking out the vent extension tube. You remove this by taking a straight screw seriver and lifting up on the clips around each piece and slowly working it out. Oh and disconnect the wire by lifting the tabs from the clips and removing. Works like a champ.

dascoat4msu, Camden, Tn

1 person thought this review was helpful.

Ease of Installation
Easy
Duration of Installation
30 minutes - 1 hour
Washer water inlet valve
August 13, 2018

not a DIY project had a trained professional who knew exactly what he was doing and it took him 30 mins to install. Hard to access to replace screw so you needed to know what you were doing to blndly tighten screw. Also had to take the two lil black Rubber gaskets off the broken part and place on new part (because it doesnt come with them) or would have had a leak.

kellygirl, stroudsburg, PA

1 person thought this review was helpful.

Ease of Installation
Moderate
Duration of Installation
30 minutes - 1 hour
Change out Washing Machine water valves
August 13, 2018

Changing out the water valves in the washer was very easy to do. no problems.

Roger T, Example: New York, NY

Did you find this review helpful?

Ease of Installation
Very Easy
Duration of Installation
30 minutes - 1 hour
Super easy to install
July 14, 2018

arrive in less time than expected, my Electrolux washer "call for serviceman". Part showed up that day. It had been leaking water into drum for about a month. Ordered part from SearsPartsDirect.com easy to figure out what I needed. Watch video on internet how to install.

FORREST, KANSAS

Did you find this review helpful?

Ease of Installation
Very Easy
Duration of Installation
30 minutes - 1 hour