$2.49 |
29% OFF Phone Price : $3.49
CONFIRM THE PART FITS
Part Information
This gearbox (part number 71464) is for snowblowers.
Gearbox 71464 rotates the auger blades inside the auger housing.
Wear work gloves to protect your hands when installing this part.
Frequently Used Together
- $66.22 |8% OFF Phone Price : $72.22
- $2.49 |29% OFF Phone Price : $3.49
- $2.49 |29% OFF Phone Price : $3.49
Top models using the same part
| Model Name | Model Number | Diagram Name |
|---|---|---|
| Model #45-0418 Agri-Fab gas snowblower | 45-0418 | Housing/spiral blades/engine |
| Model #45-04911 Agri-Fab snowblower attachment | 45-04911 | Auger & housing/chute |
| Model #486258401 Craftsman snowblower attachment | 486258401 | Auger & housing/chute |
| Model #486248374 Craftsman snowblower attachment | 486248374 | Auger & housing |
| Model #486248373 Craftsman snowblower attachment | 486248373 | Auger & housing/chute |
| Model #48624837 Craftsman snowblower attachment | 48624837 | Auger & housing/chute |
| Model #48625840 Craftsman snowblower attachment | 48625840 | Auger & housing |
| Model #LST42D Agri-Fab accessory | LST42D | Auger housing/impeller/chute |
| Model #486248381 Craftsman snowblower attachment | 486248381 | Housing/spiral/gear/chute |
| Model #45-0491 Agri-Fab snowblower attachment | 45-0491 | Auger & housing/chute |
Reviews
Cheaply made knock off that fell Apart
This Agri-Fab brand is made of very lousy materials which fell apart after only 2 seasons
Average J, Northern MA
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 1 - 2 hours
Works perfectly
Quite a bit of disassembly required to replace gearbox, but not too difficult. Need to remove splined input shaft from the sheave. Can be a little tight. Remove mounting screws from the housing and remove screws from the bearing housings, slide it out as a unit. Remove output shaft, and voila'. Reassemble.
Rick P, Example: New York, NY
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 1 - 2 hours
Yes, I would recommend this to a friend
Just a bunch of work, not as bad as it might look
Disassembling to replace the gearbox looks like a daunting task at first. It's just a multi-step process that isn't all that complex. Loctite on the drive pulley bolt caught me by surprise, but makes perfect sense. Plan on using new shear bolts.
Snowblower o, Undisclosed
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 1 - 2 hours
Yes, I would recommend this to a friend
Not the same part
Not sure if my snowblower unit is an older model but the part I received was different than the original. There is a 1/2 height difference between the two perpendicular shafts. Will see if I can drill new holes on the cowling sides to see if I can make it work...
MN-Norskie, Minnesota
1 person thought this review was helpful.
- Ease of Installation
- Difficult
- Duration of Installation
- 1 - 2 hours
Fairly simple install
Done quicker than expected.. Installed with several other parts. Whole job took some additional time.
CB87, Pequot Lakes, MN
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
Install was easy
The hard part about the snowblower gear assembly is disassembling the auger set. Once everything was disassembled and cleaned, the whole thing went together easily, new gear assembly included.Times and ratings below are strictly for assembly. Disassembly was hours of heating, driving, lubricating, etc. Expect things like the spacers to be stuck.
SGM., Hudson, New Hampshire
1 person thought this review was helpful.
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour