Lawn Tractor Wheel Rim, Front (replaces 106228X421, 106228X431, 106228X613, 106228X645) 583649501

Replace those bushings with bearings!

This rim comes with two bushings installed. However, using bushings instead of bearings was an engineering mistake. I have ordered -- but not yet installed -- a set of bearings that are supposed to replace the bushings. This is the second rim I have had to order because the bushings wore out without me noticing, thereby destroying the rim. It seems you cannot grease the axles enough to prevent the early wear of the bushings.

Ease of Installation

Easy

Duration of Installation

30 minutes - 1 hour

easy to install

after getting tire mounted, it only took about a minute to install on axle.

Ease of Installation

Very Easy

Duration of Installation

Less than 30 minutes

Yes, I would recommend this to a friend

Replace broken rim and install tire on rim

The hard part was removing the tire off of the damaged rim and install on the new rim. Be sure to order a new cap to cover up the end of the spindle, it is hard to get to old ones to stay on after they are removed and reinstalled. Most tire places will install the tire on the rim for $20.00

Ease of Installation

Moderate

Duration of Installation

30 minutes - 1 hour

Yes, I would recommend this to a friend

Perfect fit

Perfect fit and very fast service. The bearing on the old one was broken.

Ease of Installation

Very Easy

Duration of Installation

Less than 30 minutes

Yes, I would recommend this to a friend

Wheel rim for mower

I took off the tire and took to Les schwab and they put tire on new rim. Put tire back on mower and works great

Ease of Installation

Very Easy

Duration of Installation

30 minutes - 1 hour

Yes, I would recommend this to a friend

Quick service

Easy to replace little pricey but the quickness made up for it

Ease of Installation

Very Easy

Duration of Installation

Less than 30 minutes

Yes, I would recommend this to a friend

Craftsman mower front rim replacement

Replacement was straightforward; rim fit perfectly.

Ease of Installation

Easy

Duration of Installation

30 minutes - 1 hour

Yes, I would recommend this to a friend

Pretty straight forward after watching a video

Very easy once you get the grease cap off and figure out how to get the snap ring off. Hint: there are no holes so snap ring pliers don't work. Although, I did use 90 degree attachments to the pliers to get underneath the snap ring to pull it off. I had my local mechanic to take the tire off the old rim and install on the new rim. Going back on was easy and straightforward. Advice: don't buy the valve stem, too expensive.

Ease of Installation

Very Easy

Duration of Installation

Less than 30 minutes