Special details: If the timer doesn't advance during the wash cycle, unplug the washer and check for continuity through the timer motor using a multimeter. Replace timer 131437500 if your meter measures infinite resistance.
This timer (part number 131437500) is for washers.
Timer 131437500 controls the electrical components and the duration of the washer's cycles.
Unplug the washer before installing this part. Wear work gloves to protect your hands.
It was easy to install and it only took 30 minutes. Make sure you have a good Phillips screwdriver.
Ease of InstallationVery Easy
Duration of InstallationLess than 30 minutes
verified customer
1 person thought this review was helpful.
proper part
March 13, 2018|pdenese, KCMO
The part arrived in a timely manner; it was the correct part and it worked! Thank you so much.
Ease of InstallationModerate
Duration of Installation30 minutes - 1 hour
verified customer
1 person thought this review was helpful.
Fairly easy to install
April 02, 2018|Sam101, Spokane WA
Washer was dead and non-responsive on a stackable washer/dryer. Did all the regular checks. ie check for electricity, checked the lid switch by shorting the connector, and visual inspection. Pulled the control panel and could not find anything visibly wrong. So I got the model number and ordered a new Washer Timer. It mounts to the control panel with 2 10-32 screws next to the knob stem. Really easy to install except for the fact that the mounting screw holes were not tapped on the timer. I happened to have taps and tapped the holes. This would not be easy for the average person unless they know how to tap holes and have the proper tools. The good news is that it fixed the washer. Everything came back to life and the washer is working great again.
Ease of InstallationModerate
Duration of Installation30 minutes - 1 hour
verified customer
1 person thought this review was helpful.
Timer Installation
December 09, 2018|scott1628, Illinois
Part replacement is fairly simple. There are some sharp edges on some of the panels. The overtemp sensor can come unplugged when taking the mounting panel out.
verified customer