$83.99 |
7% OFF Phone Price : $89.99
CONFIRM THE PART FITS
Range Pressure Regulator 318122700
Part #318122700
Online Only Price
$113.69 |
10% OFF Phone Price : $125.69
In Stock
For ZIP codes near Edit
This part fits
Part Information
This pressure regulator (part number 318122700) is for ranges.
Pressure regulator 318122700 limits the incoming gas pressure to a safe and constant level for the burners.
Unplug the range and shut off the gas supply before installing this part. Wear work gloves to protect your hands. Gas line connections must be leak checked after the repair.
Frequently Used Together
- $31.81 |16% OFF Phone Price : $37.81
- $7.39 |12% OFF Phone Price : $8.39
- $38.84 |13% OFF Phone Price : $44.84
- $7.39 |12% OFF Phone Price : $8.39
Top models using the same part
| Model Name | Model Number | Diagram Name |
|---|---|---|
| Model #FCS388CETB Frigidaire range | FCS388CETB | Burner |
| Model #FCS388CESA Frigidaire range | FCS388CESA | Burner |
| Model #FCS388CETA Frigidaire range | FCS388CETA | Burner |
| Model #FCS388CESB Frigidaire range | FCS388CESB | Burner |
| Model #FCS388CEBA Frigidaire range | FCS388CEBA | Burner |
| Model #FCS388WECA Frigidaire range | FCS388WECA | Burner |
| Model #79046819990 Kenmore Elite range | 79046819990 | Burner |
| Model #79046813993 Kenmore Elite range | 79046813993 | Burner |
| Model #79046812990 Kenmore Elite range | 79046812990 | Burner |
| Model #79046814993 Kenmore Elite range | 79046814993 | Burner |
Reviews
Easy to install but some care is required
Item works, corrected a slow-to-ignite burners on stove top. Now the burners light at first snap of igniters. Replacement is straightforward. Should take about 20 minutes to replace and test. Although not mechanically difficult, recommend above average skill due to safety issues regarding potential for natural gas fire or explosion. Remember to turn off gas supply before you start. Take care to keep any dirt, stray tape or sealant residue from entering the regulator while installing. Be especially careful if you have to redo the threaded connection to prevent sealant tape residue from falling into the regulator which will render it useless. Remember also, instead of standard white plumbing teflon tape, use the yellow tape rated for gas/petroleum products. Do not use any sealant on flared connections. Swab connections with soapy water to test all gas connection for leaks. Any potential leaks will show up with bubbles. Make sure all leaks are corrected.
TexasDIY, San Antonio, TX
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour