CONFIRM THE PART FITS

Dryer Heating Element (replaces 436460) 00436460

Part #00436460

This part is no longer available.

We've permanently sold out of this part. It's no longer available from the manufacturer and the manufacturer has no substitute for this part. Although our call center staff is always happy to help when possible, they don't have access to this part. If you can't find that part and decide to replace the product, we invite you to visit www.sears.com

Only ground shipment is available for this item.

This part fits

Part Information

This heating element (part number 00436460) is for dryers.

Heating element 00436460 generates the dryer's heat.

Disconnect the power before installing this part. Wear work gloves to protect your hands.

Reviews

Complete original part
December 15, 2020

Find detailed instructions on youtube. Relatively easy to install.

Trini, Lawrenceville, GA

Did you find this review helpful?

Ease of Installation
Easy
Duration of Installation
30 minutes - 1 hour

Yes, I would recommend this to a friend

Easy replacement.
April 15, 2020

This was for a Bosch Nexxt 500 series dryer, and the element I replaced was about 14 years old. Thanks to YouTube, it was a relatively easy fix. Hardest part was getting the old wires disconnected from the element that I removed. Requires a torque wrench/drill bit to remove all the screws from the back of the dryer and installing the element.

Steve8925, Memphis, TN

Did you find this review helpful?

Ease of Installation
Easy
Duration of Installation
30 minutes - 1 hour

Yes, I would recommend this to a friend

As described for Siemens dryer
May 22, 2018

Part was easy to swap and dryer hasn't had the thermomcouple reset on the new heater after 10 loads. Biggest pain is always getting the back cover off the dryer. Actual oartninstakl was a couple of minutes.

Jonny b, Iowa

Did you find this review helpful?

Ease of Installation
Very Difficult
Duration of Installation
30 minutes - 1 hour
Super easy to install.
May 07, 2018

It was very simple to replace. The longest part of the process was removing the screws to gain access to the part. It was surprising how quick and easy this repair was.

ChrisP6, Prairie Village, KS

Did you find this review helpful?

Ease of Installation
Very Easy
Duration of Installation
30 minutes - 1 hour
Easy to install
March 22, 2018

It was easy to install. Took about an hour. Removed the back and top panel of the dryer.

Ajwi, Boston, MA

Did you find this review helpful?

Ease of Installation
Easy
Duration of Installation
30 minutes - 1 hour