I boght another simmilar part online but didn't work. However this thermistor when I installed work as before as intended. It does the job.
Ease of InstallationEasy
Duration of InstallationMore than 2 hours
verified customer
Was this review helpful?
Quick delivery and easy install
August 02, 2019|AlFonz, Central NJ
Exchanged motherboard on Kenmore dryer. Install was simple and works as it should.
Ease of InstallationEasy
Duration of Installation30 minutes - 1 hour
verified customer
Was this review helpful?
Worked great
August 21, 2018|cavman35, NH
I did a test between the old part and the new part with a multi meter. The old one read at 17,000 OHMS and the new one read at 55,000 OHMS. I then ran the Dryer self test and it passed fine with a proper temperature reading.
Ease of InstallationVery Easy
Duration of InstallationLess than 30 minutes
verified customer
1 person thought this review was helpful.
Unused part
March 29, 2018|LWA83632, Kuna, Idaho
Decided not to repair the dryer because of it's age, so I returned the part
Ease of InstallationModerate
Duration of Installation30 minutes - 1 hour
verified customer
1 person thought this review was helpful.
The part was delivered with a bent pin
December 17, 2020|Rob R, Austin, Texas
I sent the part back because it had a bent pin and was damaged.
Ease of InstallationDifficult
Duration of Installation1 - 2 hours
verified customer
Yes, I would recommend this to a friend
Was this review helpful?
Wrong part
August 19, 2019|twopi, Evansville Indiana
The Maytag part number 307208 was ordered which is a 10k ohm thermistor. The part number given to me (134587700) is a 50k ohm thermistor which is the wrong part. The electrical tabs were too large and the wires would not plug onto it.
verified customer