CONFIRM THE PART FITS
Part Information
This door interlock support (part number WP8206419) is for microwaves.
Door interlock support WP8206419 holds the door interlock switch.
Because the microwave shielding and interlock switches must be properly tested following the door interlock replacement, a service technician should install this part.
Frequently Used Together
- $23.43|Â20% OFF Phone Price : $29.43
- $4.84|Â17% OFF Phone Price : $5.84
- $7.56|Â12% OFF Phone Price : $8.56
- $11.59|Â15% OFF Phone Price : $13.59
- $39.99|Â13% OFF Phone Price : $45.99
- $7.73|Â11% OFF Phone Price : $8.73
- $31.20|Â16% OFF Phone Price : $37.20
- $35.20
- $23.80
- $31.80|Â16% OFF Phone Price : $37.80
Top models using the same part
Model Name | Model Number | Diagram Name |
---|---|---|
Model #JMV9196CB1 Jenn-Air microwave/hood combo | JMV9196CB1 | Interior and ventilation parts |
Model #JMV9196CS3 Jenn-Air microwave/hood combo | JMV9196CS3 | Interior and ventilation parts |
Model #JMV9196CB2 Jenn-Air microwave/hood combo | JMV9196CB2 | Interior and ventilation parts |
Model #JMV9196CB4 Jenn-Air microwave/hood combo | JMV9196CB4 | Interior and ventilation parts |
Model #YJMV9196CB0 Jenn-Air microwave/hood combo | YJMV9196CB0 | Interior and ventilation parts |
Model #KHMS2040BBL1 KitchenAid microwave/hood combo | KHMS2040BBL1 | Interior and ventilation parts |
Model #KHMS2040BWH1 KitchenAid microwave/hood combo | KHMS2040BWH1 | Interior and ventilation parts |
Model #WMH73521CW3 Whirlpool microwave/hood combo | WMH73521CW3 | Interior and ventilation parts |
Model #YWMH32519HV2 Whirlpool microwave/hood combo | YWMH32519HV2 | Interior and ventilation parts |
Model #WMH32519HW3 Whirlpool microwave/hood combo | WMH32519HW3 | Interior and ventilation parts |
Reviews
MICROWAVE DOOR INTERLOCK SWITCH HOLDER
I had intermittent operation of the unit and a message to close the door when it was closed. I had replaced two of the switches before and in the process, broke the upper switch holder. several months later, the problem reappeared so I ordered a new holder. Removing six screws gave me access to all the parts. A number 10 Torx driver is needed to remove the two holders.
joey, new your city
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend