CONFIRM THE PART FITS
Part Information
Helpful DIY instructions: Installation guide.
Special details: Carburetor 545081885 doesn't include the primer bulb; order the primer bulb for your chainsaw model separately.
This carburetor (part number 545081885) is for chainsaws.
Carburetor 545081885 mixes air and gas before the fuel mix goes to the engine.
Wear work gloves to protect your hands and work in a well-ventilated area during this repair.
Top models using the same part
| Model Name | Model Number | Diagram Name |
|---|---|---|
| Model #1975 TYPE 1-5 Poulan gas chainsaw | 1975 TYPE 1-5 | Cylinder/shield-cylinder |
| Model #358351142 Craftsman gas chainsaw | 358351142 | Engine |
| Model #358351062 Craftsman gas chainsaw | 358351062 | Engine |
| Model #1975 TYPE 7 Poulan gas chainsaw | 1975 TYPE 7 | Cylinder/shield-cylinder |
| Model #2050WT TYPE 7 Poulan gas chainsaw | 2050WT TYPE 7 | Engine |
| Model #BH2660 Poulan gas chainsaw | BH2660 | Shield/cylinder/crankshaft |
| Model #BH2160LE Poulan gas chainsaw | BH2160LE | Shield/cylinder/crankshaft |
| Model #222 Poulan gas chainsaw | 222 | Shield/cylinder/crankshaft |
| Model #262 Poulan gas chainsaw | 262 | Shield/cylinder/crankshaft |
| Model #358351040 Craftsman gas chainsaw | 358351040 | Carburetor kit #530-069703 |
Reviews
Carb replacement
Easy to install, worked well but had to adjust the high speed adjustment about 1/8 turn out.
Old g, Vonore, tn
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
Yes, I would recommend this to a friend
What I was looking for
Had an older craftsman chainsaw that wouldn't start easily and when it did it wouldn't idle. Decided to replace the carb I believe it was under $30. Solved my problems. Now it starts right up and idles fine.
Bwdriscoll, Boston, ma
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Completely wrong carb
This carb will not work on my chainsaw. Rechecked part number on Sears site, original number was changed and this carb is incorrect. Not worth the cost of shipping to send back.
Steve, Florida
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Not as described!
I asked the chat line if it came with a primer bulb , they assured me it did , and it did not ! Now I have to wait for more parts !
Bob61, Florida
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Mostly straightforward
It wasn't exact carb as stated. Required slight modification to filter housing. Just a little plastic sanding with dremel tool to allow throttle to work properly
Bob61, Oklahoma
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Perfect Fit
Fast delivery. Part was exactly what I needed and works like a charm!
Phil D, Newark, Delaware
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Just What I Needed
The carburetor and fuel lines were easy to install and just what I needed to get my chainsaw running after sitting for several years.
Easyrider, Atlanta, GA
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Difficult to return
Ordered this part and did not need when rebuilding saw. Tried to return online with no success. Called for authorization number and never received number via email
Bill, SC
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- Less than 30 minutes
Yes, I would recommend this to a friend