$59.36 |Â
9% OFFÂ Phone Price : $65.36
CONFIRM THE PART FITS
Part Information
This gear case (part number W11132267) is for washers.
Gear case W11132267 drives the agitator and spins the basket in the washer.
Unplug the washer before installing this part. Wear work gloves to protect your hands.
Frequently Used Together
- $55.02 |Â10% OFFÂ Phone Price : $61.02
- $44.77 |Â12% OFFÂ Phone Price : $50.77
- $27.45 |Â18% OFFÂ Phone Price : $33.45
- $113.30 |Â10% OFFÂ Phone Price : $125.30
- $272.94 |Â$12.00 OFFÂ Phone Price : $284.94
- $40.98 |Â13% OFFÂ Phone Price : $46.98
- $245.99 |Â5% OFFÂ Phone Price : $257.99
- $118.19 |Â9% OFFÂ Phone Price : $130.19
- $4.89 |Â17% OFFÂ Phone Price : $5.89
Top models using the same part
| Model Name | Model Number | Diagram Name |
|---|---|---|
| Model #11026012011 Kenmore washer | 11026012011 | Gearcase, motor and pump parts |
| Model #WTW5700XW0 Whirlpool washer | WTW5700XW0 | Gearcase, motor and pump parts |
| Model #7MWTW5500XW1 Whirlpool washer | 7MWTW5500XW1 | Gearcase, motor and pump parts |
| Model #4GWTW5550YW1 Whirlpool washer | 4GWTW5550YW1 | Gearcase, motor and pump parts |
| Model #WTW5500XL1 Whirlpool washer | WTW5500XL1 | Gearcase, motor and pump parts |
| Model #4GWTW4950YW1 Whirlpool washer | 4GWTW4950YW1 | Gearcase, motor and pump parts |
| Model #WTW5500XW0 Whirlpool washer | WTW5500XW0 | Gearcase, motor and pump parts |
| Model #7MWTW5500XW0 Whirlpool washer | 7MWTW5500XW0 | Gearcase, motor and pump parts |
| Model #WTW5500XL0 Whirlpool washer | WTW5500XL0 | Gearcase, motor and pump parts |
| Model #11028002011 Kenmore washer | 11028002011 | Gearcase, motor and pump parts |
Reviews
Good service all around
I purchased (which was very easy to do)part because my appliance repair man said he couldn't get one for a while. After receiving the part, repairman came to install it but he couldn't remove the old one that was solidly frozen in place. I had to return it and receive email with return slip after calling.
Charles, Southbury, CT
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
Yes, I would recommend this to a friend
Great!
This part was put on a 2011 Maytag Centennial . Perfect fit, all screw holes lined up perfectly. A new tub water seal was preinstalled on the new gear case. My inner tub was held in w/the metal spanner nut and two piece metal flange. The new gear case came w/the plastic flange and c shaped plastic locking clip which replaced my old metal flange assembly. The new flange fit perfectly. The hardest part of the job was removing the metal tub flange.
RonK, Connecticut
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 1 - 2 hours
Yes, I would recommend this to a friend
Easy to install
The videos on Sears Direct make installation easy.
lappy, Indiana
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
Easy to install
Was self explanatory just opposite of removal did it after dinner
Mad r m, Manteca CA
1 person thought this review was helpful.
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
Exactly as advertised.
Everything installed without a hitch. No complaints.
Searsman, Undisclosed
1 person thought this review was helpful.
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
This did the trick
Loud noise indicated hub was going. This part did the trick. Highly suggest getting the drive hub kit in advance - very likely to be destroyed in the process. Repair was straightforward, but removing old parts was the difficult part, requiring a mix of WD40, a srcrew extractor, a dremel, a cold chisel and a small sledge hammer.
SPD R, Wall, NJ
1 person thought this review was helpful.
- Ease of Installation
- Difficult
- Duration of Installation
- More than 2 hours
Not too bad to install
Use bottle jack and short piece of 2x4 to press down on shaft.. it doesn't come out easily
George615, Birdsboro pa
1 person thought this review was helpful.
- Ease of Installation
- Moderate
- Duration of Installation
- 1 - 2 hours
Perfect Fit
Removing the old gear case was very difficult due to rust. Tried many different ways to remove it, eventually had to cut the old metal "collar" that was screwed into the washer plate using an angle grinder. This new gear case came with a plastic collar, much better design. Washer works perfectly now.
Paul 3, Redondo Beach, CA
1 person thought this review was helpful.
- Ease of Installation
- Difficult
- Duration of Installation
- More than 2 hours