$22.08 |Â
21% OFFÂ Phone Price : $28.08
CONFIRM THE PART FITS
Dryer Radiant Sensor (replaces 338906) WP338906
Part #WP338906
Online Only Price
$38.79 |Â
13% OFFÂ Phone Price : $44.79
In Stock
For ZIP codes near Edit
This part fits
Part Information
This radiant sensor (part number WP338906) is for dryers.
Radiant sensor WP338906 monitors whether the igniter is hot enough to ignite gas to light the burner.
Unplug the dryer before installing this part and wear work gloves to protect your hands.
Frequently Used Together
- $29.18 |Â17% OFFÂ Phone Price : $35.18
- $32.80 |Â15% OFFÂ Phone Price : $38.80
- $44.11 |Â12% OFFÂ Phone Price : $50.11
- $19.12 |Â9% OFFÂ Phone Price : $21.12
- $16.39 |Â11% OFFÂ Phone Price : $18.39
- $48.99 |Â11% OFFÂ Phone Price : $54.99
- $18.96 |Â10% OFFÂ Phone Price : $20.96
- $200.72 |Â6% OFFÂ Phone Price : $212.72
- $29.06 |Â17% OFFÂ Phone Price : $35.06
Top models using the same part
| Model Name | Model Number | Diagram Name |
|---|---|---|
| Model #11077403600 Sears dryer | 11077403600 | Bulkhead assembly |
| Model #11077403100 Sears dryer | 11077403100 | Bulkhead assembly |
| Model #11079495100 Kenmore dryer | 11079495100 | Bulkhead assembly |
| Model #11079496400 Kenmore dryer | 11079496400 | Bulkhead assembly |
| Model #11079495610 Kenmore dryer | 11079495610 | Bulkhead assembly |
| Model #11079496410 Kenmore dryer | 11079496410 | Bulkhead asm |
| Model #11079496600 Kenmore dryer | 11079496600 | Bulkhead assembly |
| Model #11079495400 Kenmore dryer | 11079495400 | Bulkhead assembly |
| Model #11077680600 Sears dryer | 11077680600 | Bulkhead assembly |
| Model #11077885100 Sears dryer | 11077885100 | Bulkhead assembly |
Reviews
you said it would fit my dryer.
your site said it was for this dryer,,his part did not fit my dryer. i now i m stuck with a part that does go on my gas dryer..i.t must be for a elect(. dryer mine is gas. )
none, lacombe la. 70445
Did you find this review helpful?
- Ease of Installation
- Very Difficult
- Duration of Installation
- More than 2 hours
Yes, I would recommend this to a friend
Works Great
Installation was easy, because, the sensor in my Kenmore dryer was accessible after opening access panel, located below the door. However, I had unplugged the dryer before opening the front panel.
NAC1, NJ
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Parts
you guys sent me the wrong part, I need to return it.
Undisclosed, Los Angeles, CA
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
Yes, I would recommend this to a friend
Flame sensor
Easy to install one screw and two wires. The only bad part is you have to dismantle the front and remove the tub. Just part of the process.
Frank K, Undisclosed
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- 1 - 2 hours
Yes, I would recommend this to a friend
easy to install
unit was easy to install and acureate about 15 minutes
Richard N, phila pa.
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
Got the correct part & it got here fast.
Went in & tested fine; followed by a huge laundry load.
Monny, Carteret, NJ
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
the part was fine, the dryer too old to fix
easy to install but needed many other parts--opt for new machine waiting fund of part
weeks, Undisclosed
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
Easy to install
It was easy to install took 2 hours to remove all components and reverse the process great chance to clean all parts covered in dust and lint. regrease all roller bears .
Sawman 1, Mass
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour